Audi S6 Base 2013 with 20×10 / 20×10-inch Anovia Elder Wheel

About This Audi S6 Base 2013 Build

We love featuring real builds from real owners. This Audi S6 Base 2013 sits on a set of 20×10 / 20×10-inch Anovia Elder wheels, and the result speaks for itself.

The owner chose Anovia for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Audi S6 Base builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Anovia Elder creates a look that balances aggression with elegance.

Fitment Breakdown: Anovia Elder on the Audi S6 Base 2013

I walked around this S6 at the last meet and the 20x10 Anovia Elder setup caught my eye immediately. We rarely see a 10-inch width work this well on the C7 chassis without major surgery. The 40 offset pulls these wheels right to the edge of the fender line.

You get a flush stance that looks intentional rather than desperate. That 40 offset keeps the wheel face tucked just enough to avoid looking like a cartoonish hot wheels car. It stays classy while demanding your full attention.

We checked the inner clearance and the Elders clear those massive stock Audi calipers with room to spare. You do not need to worry about the spokes hitting the hat or the caliper body. The spoke design arcs gracefully to provide plenty of physical space.

The hub bore on these fits the S6 perfectly, so you get a true hub-centric mounting. That kills vibration at high speeds and keeps your steering feeling tight. We love setups that do not require plastic hub rings.

Because the car sits on stock suspension, you see a bit of daylight in the wheel arch. It is not an eyesore, but it shows off the barrel design. You notice the deep profile of the wheel since the car isn't slammed to the floor.

Be careful on sharp, mid-corner bumps if you run a fat tire. The 10-inch width pushes the sidewall out quite a bit, so you could catch the fender liner if you load the suspension hard. We suggest a slightly stretched tire profile to keep things safe.

Overall, this 20x10 square setup balances the car's weight distribution perfectly. It creates a bold, planted look that defines the C7's aggressive lines. It is a textbook example of aggressive fitment done right.

What We Recommend for Audi S6 Base 2013 Owners

We always tell people to aim for the 9.5 to 10-inch width range on the S6. Anything narrower looks sunken, but wider than 10.5 often requires permanent fender mods. Stick to the sweet spot we found here.

For offsets, keep that number between 35 and 42 for a perfect flush look. If you go lower than 35, you will poke past the fender and start throwing rocks at your paint. If you go higher than 45, you lose that aggressive stance.

Square setups are our go-to for the Audi platform. Rotating your tires properly matters when you have Quattro AWD. Staggered setups look cool, but they ruin your handling balance and tire life.

Do not cheap out on tires when running a 10-inch wide wheel. Get a tire with a decent rim protection lip to save those beautiful Brushed Apollo Silver faces. A 265 or 275 section width works wonders here.

Watch your spacer usage if you decide to tweak the fitment later. Most owners throw on spacers and ruin the scrub radius. If you buy the right offset initially, you never need to touch spacers.

Style and Build Analysis

The Brushed Apollo Silver finish on these Elders is absolute fire. It isn't just a standard silver paint; it has a hand-brushed texture that catches the sun. It creates a premium, high-end vibe that matches the luxury of the S6 perfectly.

When the light hits the spokes, you see deep, complex highlights. It breaks up the dark, monochromatic look of the car's body. It provides a sharp contrast that makes the wheels pop from ten feet away.

The Elder design is clean and architectural, which fits the Audi brand philosophy. It is not overly busy or cluttered with fake bolts and vents. It looks like a factory performance wheel, just dialed up to eleven.

This car holds a presence that makes people stop and stare. It has that "grown-up" muscle look that we love to see. It is refined enough for a board meeting but aggressive enough for a canyon run.

We have seen plenty of S6 builds with black wheels that just disappear into the dark arches. This build proves that a bright, textured silver finish creates much better proportions. It makes the car look lighter and more agile on its feet.

Why We Love This Build

This Audi S6 sits exactly how a German sport sedan should. The Brushed Apollo Silver wheels catch the light and highlight the crisp geometry of the Elder spokes. The car looks ready to pounce, even when parked.

Seeing those 20-inch wheels fill the arches makes us realize how much the right offset changes a car's soul. It feels cohesive, engineered, and undeniably cool. It reminds us why we get hooked on this hobby in the first place.

If you want to turn your S6 into a proper head-turner, start right here with this setup. It is the perfect blend of style and daily-driveable performance. Trust us, this fitment wins every single time.

Full Specs Breakdown

Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.

  • Car Make & Model: Audi S6 Base 2013
  • Vehicle Color:
  • Wheel Brand & Model: Anovia Elder
  • Wheel Size: 20×10 / 20×10
  • Offset: 40 / 40
  • Wheel Finish: Brushed Apollo Silver
  • Tires: Sailun Artezzo SVA1 255/35 27″x10″ / 255/35 27″x10″
  • Suspension: Stock

Before You Buy: Fitment Checklist

Wheel sizes explained - diameter, width, offset and backspacing guide
Understanding wheel sizing: diameter, width, offset and backspacing all affect fitment on your Audi S6 Base.

We talk to Audi S6 Base owners every day. These are the questions we hear most before they pull the trigger on new wheels.

Will 20×10 / 20×10-inch wheels fit my Audi S6 Base? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.

Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.

Can I daily-drive this setup? Absolutely. Thousands of Audi S6 Base owners run 20×10 / 20×10-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.

Audi S6 Base2013 with 20×10 / 20×10-inch Anovia Elder Wheel Gallery

Related Galleries & Links

Filter