Gallery

Audi RS5 B9 on Concaver CVR4 Wheels

This Green Audi RS5 B9 is running 20×11-inch Concaver CVR4 wheels finished in Brushed Bronze.

Wheel Specs

• Brand: Concaver
• Model: CVR4
• Size: 20×11
• Finish: Brushed Bronze

The Concaver CVR4 wheels, finished in brushed bronze, present a compelling aesthetic choice for the Audi RS5 B9, but their 20x11 size demands careful consideration regarding fitment. Selecting an 11-inch wide wheel necessitates precise offset calculations to avoid rubbing against the suspension components or fender liners, particularly during suspension compression.

Owners aiming to replicate this configuration should prioritize verifying adequate inner and outer clearances. Tire selection also becomes crucial; a low-profile tire with appropriately sized sidewalls will likely be required to prevent contact and maintain speedometer accuracy.

Furthermore, the brushed bronze finish complements the green paintwork, yet potential buyers must assess the coating's durability against road salts and brake dust. Consistent cleaning with pH-neutral products will preserve the wheel's appearance and prevent premature degradation of the finish.

View gallery and fitment of this Audi RS5 →

Audi TT 8S on Vossen HF-3 Wheels

This Grey Audi TT 8S is running 19-inch Vossen HF-3 wheels finished in Satin Black.

Wheel Specs

• Brand: Vossen
• Model: HF-3
• Size: 19
• Finish: Satin Black

Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.

The Audi TT 8S cuts a sharp silhouette against the urban concrete. Its Nardo Grey finish radiates a cold, sophisticated menace on the road.

Vossen HF-3 wheels in satin black add a brutalist edge to the design. These nineteen-inch alloys ground the coupe with pure, calculated mechanical intent. This build remains a masterclass in modern, understated German precision.

View gallery and fitment of this Audi TT →

Audi RS4 B7 on BC Forged LE72 Wheels

This Yellow Audi RS4 B7 is running 20×10-inch BC Forged LE72 wheels. Paired with 265/30/20 tires. Suspension is Air Lift Performance.

Wheel Specs

• Brand: BC Forged
• Model: LE72
• Size: 20×10
• Tires: 265/30/20
• Suspension: Air Lift Performance

Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.

The Imola Yellow Audi RS4 B7 commands instant, undivided attention on any asphalt surface. Its aggressive stance arrives courtesy of a precise Air Lift Performance suspension setup.

Massive 20-inch BC Forged LE72 wheels anchor the build with undeniable mechanical authority. This vibrant wagon perfectly blends nostalgic touring car spirit with modern, polished street aggression.

View gallery and fitment of this Audi RS4 →

Audi TT 8J on BBS RS-GT Wheels

This White Audi TT 8J is running 18-inch BBS RS-GT wheels finished in Diamond Black. Paired with 245/40/18 tires.

Wheel Specs

• Brand: BBS
• Model: RS-GT
• Size: 18
• Finish: Diamond Black
• Tires: 245/40/18

The BBS RS-GT design perfectly complements the Audi TT 8J body lines. Its intricate spoke geometry provides excellent brake clearance and ideal aesthetic proportions.

These eighteen-inch wheels offer superior handling dynamics for this compact sports coupe. The diamond black finish creates a sophisticated stance that looks incredibly sharp.

View gallery and fitment of this Audi TT →

Audi Q5/SQ5 on Vossen HF-5 Wheels

This White Audi Q5/SQ5 is running 22×10.5-inch Vossen HF-5 wheels finished in Gloss Black.

Wheel Specs

• Brand: Vossen
• Model: HF-5
• Size: 22×10.5
• Finish: Gloss Black

Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.

Read our Audi SQ5 wheel guide for fitment recommendations.

The Vossen HF-5 wheels provide an aggressive stance for the Audi Q5 platform. These 22-inch alloys enhance mechanical grip while sharpening the SUV’s visual profile.

Owners must prepare for significant changes to ride compliance with this 22-inch fitment. Selecting high-quality tires remains vital to maintaining the precise handling characteristics expected here.

View gallery and fitment of this Audi Q5/SQ5 →

Audi S5 B9 on Vossen HF-4T Wheels

This Black Audi S5 B9 is running 20×10.5-inch Vossen HF-4T wheels finished in Silver Polished.

Wheel Specs

• Brand: Vossen
• Model: HF-4T
• Size: 20×10.5
• Finish: Silver Polished

Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.

The Vossen HF-4T wheels project a sophisticated, luxury-focused aesthetic for the Audi S5. This choice signals an intent to elevate the vehicle's inherent executive sport character.

Silver polished finishes contrast sharply against the deep black bodywork of the B9. This combination achieves a cohesive, refined stance that commands significant presence on the street.

The aggressive 20x10.5 fitment optimizes the coupe’s silhouette without compromising its restrained German design language. This build successfully balances high-end aftermarket flair with Audi’s signature understated performance styling.

View gallery and fitment of this Audi S5 →

Audi Q8 on AG Luxury AGL43 Wheels

This Black Audi Q8 is running 23×10.5 and 23×12-inch AG Luxury AGL43 wheels finished in Gloss Black.

Lumma Design CLR 8 S widebody

Wheel Specs

• Brand: AG Luxury
• Model: AGL43
• Size: 23×10.5 and 23×12
• Finish: Gloss Black

The obsidian Q8 glides through the city, a monolith wrapped in midnight shadows. Massive AGL43 wheels fill every arch with aggressive, gloss black precision.

These twenty-three-inch blades strike a brutal pose against the dark, polished bodywork. This build stands as a silent, formidable statement of pure modern elegance.

View gallery and fitment of this Audi Q8 →

Audi Q5/SQ5 on BC Forged HBR7S Wheels

This Grey Audi Q5/SQ5 is running 21×10-inch BC Forged HBR7S wheels finished in Matte Bronze. Paired with 285/35/21 tires.

Wheel Specs

• Brand: BC Forged
• Model: HBR7S
• Size: 21×10
• Finish: Matte Bronze
• Tires: 285/35/21

Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.

Read our Audi SQ5 wheel guide for fitment recommendations.

The grey Audi Q5 commands attention through its monochromatic, understated presence. Matte bronze wheels provide a sharp, intentional contrast against the muted bodywork.

These expansive twenty-one inch alloys transform the vehicle into a grounded machine. This build represents the perfect marriage of factory refinement and bespoke mechanical aggression.

View gallery and fitment of this Audi Q5/SQ5 →

Audi Q5/SQ5 on BBS CH-R II Wheels

This Black Audi Q5/SQ5 is running 22×10.5-inch BBS CH-R II wheels finished in Satin Bronze. Paired with 265/35/22 tires. Suspension is KW Variant 2.

20mm front spacers

Wheel Specs

• Brand: BBS
• Model: CH-R II
• Size: 22×10.5
• Offset: ET48 and ET20
• Finish: Satin Bronze
• Tires: 265/35/22
• Suspension: KW Variant 2

Read our Audi SQ5 wheel guide for fitment recommendations.

The murdered-out Audi Q5 sheds its suburban skin for a menacing, aggressive stance. Massive BBS CH-R II wheels in satin bronze provide a sharp, unexpected visual strike.

KW Variant 2 coilovers drop the chassis, tucking those twenty-two-inch rollers with absolute precision. This stealthy machine defines the perfect marriage of luxury refinement and raw mechanical edge.

View gallery and fitment of this Audi Q5/SQ5 →

Audi S4 B9 on VMR V810 Wheels

This Silver Audi S4 B9 is running 19×9.5-inch VMR V810 wheels finished in Gunmetal. Suspension is EMD Auto springs.

Wheel Specs

• Brand: VMR
• Model: V810
• Size: 19×9.5
• Finish: Gunmetal
• Suspension: EMD Auto springs

The silver Audi S4 gleams under the streetlights like a honed blade of brushed steel. Gunmetal VMR V810 wheels nestle deep into the arches with aggressive, purposeful tension.

Lowered on EMD Auto springs, the chassis hunkers down with a predatory, track-focused stance. This understated machine perfectly balances daily luxury with a sharp, lethal edge of performance.

View gallery and fitment of this Audi S4 →

Audi Q3 on Stance SF03 Wheels

This Grey Audi Q3 is running 19×9.5-inch Stance SF03 wheels finished in Brushed Bronze. Paired with 245/45/19 tires.

Wheel Specs

• Brand: Stance
• Model: SF03
• Size: 19×9.5
• Finish: Brushed Bronze
• Tires: 245/45/19

The Stance SF03 split-spoke design provides excellent brake clearance for the Audi Q3 chassis. These wheels maintain perfect proportions without compromising the sophisticated geometry of the SUV platform.

Brushed bronze finishes create a sharp visual contrast against the grey Audi paint job. This setup achieves a flush, aggressive stance while maintaining essential daily driving functionality.

View gallery and fitment of this Audi Q3 →

Audi RS3 8V Sedan on WedsSport TC-105X Wheels

This White Audi RS3 8V Sedan is running 18×8.5-inch WedsSport TC-105X wheels finished in EJ-Titan.

Wheel Specs

• Brand: WedsSport
• Model: TC-105X
• Size: 18×8.5
• Offset: +43
• Finish: EJ-Titan

The white Audi RS3, subtly lowered, presents a study in restrained aggression. The WedsSport TC-105X wheels in EJ-Titan finish provide a visual anchor, their motorsport heritage evident.

Form perfectly follows function with this well-judged aesthetic. The wheel choice isn't merely cosmetic; it hints at a purposeful commitment to enhanced performance.

View gallery and fitment of this Audi RS3 →