Gallery

Audi S5 B8 on Blaque Diamond BD-F18 Wheels

This Black Audi S5 B8 is running 20×10-inch Blaque Diamond BD-F18 wheels finished in Gloss Black. Paired with 275-30-20 tires.

Wheel Specs

• Brand: Blaque Diamond
• Model: BD-F18
• Size: 20×10
• Finish: Gloss Black
• Tires: 275-30-20

The Blaque Diamond BD-F18 wheels provide a sophisticated aesthetic upgrade for the Audi S5 B8. These twenty-inch rims optimize unsprung mass and improve the vehicle's aggressive, low-slung stance.

Owners must ensure proper offset calibration to avoid potential rubbing on the inner fender wells. Matching these wheels with 275-30-20 rubber preserves essential handling dynamics and steering precision.

View gallery and fitment of this Audi S5 →

Audi R8 on Ace Alloy CONVEX Wheels

This Red Audi R8 is running 20×9 and 20×10.5-inch Ace Alloy CONVEX wheels finished in Titanium.

Wheel Specs

• Brand: Ace Alloy
• Model: CONVEX
• Size: 20×9 and 20×10.5
• Finish: Titanium

The Misano Red Audi R8 commands immediate attention on any urban street. Its striking silhouette pairs perfectly with the aggressive Ace Alloy CONVEX wheels.

These Titanium finished rollers measure twenty inches across to widen the stance. This precise configuration cements the machine as a modern masterpiece of automotive design.

View gallery and fitment of this Audi R8 →

Audi S4 B8 on Ace Alloy CONVEX Wheels

This White Audi S4 B8 is running 20×9-inch Ace Alloy CONVEX wheels finished in Matte Black.

Wheel Specs

• Brand: Ace Alloy
• Model: CONVEX
• Size: 20×9
• Finish: Matte Black

The Ace Alloy Convex features aggressive spoke geometry that complements the sharp Audi body lines. Its 20-inch diameter clears the massive S4 front calipers while maintaining perfect visual balance.

This specific setup provides a flush, muscular stance without compromising the factory suspension geometry. The matte black finish against a white exterior creates a sophisticated, high-contrast aesthetic for owners.

View gallery and fitment of this Audi S4 →

Audi A3 8V on Ace Alloy DRIVEN Wheels

This Black Audi A3 8V is running 19-inch Ace Alloy DRIVEN wheels finished in Brushed Bronze.

Wheel Specs

• Brand: Ace Alloy
• Model: DRIVEN
• Size: 19
• Finish: Brushed Bronze

The black Audi A3, a canvas of restrained aggression, immediately commands attention. Its Ace Alloy DRIVEN wheels, finished in brushed bronze, offer a striking contrast that elevates the car's overall aesthetic without being ostentatious.

The wheel size, a substantial 19 inches, fills the arches perfectly, contributing to an enhanced stance. This A3 doesn't shout; it speaks with a low, confident growl, knowing exactly what it is.

It's a statement in subtle power, a testament to refined taste. This machine is not asking for permission; it’s already taken the lead.

View gallery and fitment of this Audi A3 →

Audi RS6 C7 on Ace Alloy AFF09 Wheels

This Purple Audi RS6 C7 is running 21-inch Ace Alloy AFF09 wheels finished in Liquid Silver w/ Machined Face.

Wheel Specs

• Brand: Ace Alloy
• Model: AFF09
• Size: 21
• Finish: Liquid Silver w/ Machined Face

The Ace Alloy AFF09 spoke geometry complements the aggressive Audi RS6 C7 design language. These wheels provide ample clearance for the massive factory carbon ceramic brake calipers.

A twenty-one inch diameter ensures perfect proportions for this widebody performance wagon chassis. This configuration achieves an ideal balance between daily drivability and an aggressive track stance.

View gallery and fitment of this Audi RS6 →

Audi S5 B8 on HRE P40SC Wheels

This White Audi S5 B8 is running 20×10-inch HRE P40SC wheels finished in Brushed.

Wheel Specs

• Brand: HRE
• Model: P40SC
• Size: 20×10
• Offset: 28mm and 21mm
• Finish: Brushed

HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.

The white Audi S5 B8 demands a sophisticated balance of performance and understated luxury. Choosing HRE P40SC wheels signals a driver prioritizing refined engineering over aggressive trends.

These 20x10 brushed rollers anchor the chassis with a timeless, architectural aesthetic. This setup elevates the coupe into a quintessential example of modern aftermarket restraint.

View gallery and fitment of this Audi S5 →

Audi RS7 C7 on HRE P101 Wheels

This Grey Audi RS7 C7 is running 21-inch HRE P101 wheels finished in Satin Charcoal.

Wheel Specs

• Brand: HRE
• Model: P101
• Size: 21
• Finish: Satin Charcoal

HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.

The HRE P101 wheel, specified here in a 21-inch diameter, presents a technically sound option for the Audi RS7 C7 chassis. Its lightweight forged construction improves upon the rotational inertia of the factory wheels, enhancing both acceleration and braking performance.

Owners looking to duplicate this aesthetic should carefully consider offset to ensure proper fitment and avoid rubbing, especially under load. Furthermore, choosing a reputable installer is paramount to guarantee correct mounting and torque specifications, preserving wheel integrity and vehicle safety.

View gallery and fitment of this Audi RS7 →

Audi S5 B8 on BC Forged RZ05 Wheels

This Red Audi S5 B8 is running 20×10-inch BC Forged RZ05 wheels finished in Brushed Black. Paired with 275/30/20 tires. Suspension is H&R Coilovers.

3mm spacer rear

Wheel Specs

• Brand: BC Forged
• Model: RZ05
• Size: 20×10
• Offset: +25
• Finish: Brushed Black
• Tires: 275/30/20
• Suspension: H&R Coilovers

Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.

The choice of BC Forged RZ05 wheels signals a shift toward modern performance aesthetics. This selection prioritizes technical precision over the typical aggressive aftermarket stance.

Brushed black finishes provide a sophisticated contrast against the vibrant red Audi bodywork. H&R coilovers successfully bridge the gap between daily usability and track-inspired mechanical focus. This B8 S5 represents a balanced evolution of the iconic German grand tourer. It effectively captures the current trend toward understated and functional custom automotive design.

View gallery and fitment of this Audi S5 →

Audi RS5 B8 on BC Forged RS42 Wheels

This Silver Audi RS5 B8 is running 20×10-inch BC Forged RS42 wheels finished in Matte Black. Paired with 275/30/20 tires. Suspension is KW H.A.S.

Wheel Specs

• Brand: BC Forged
• Model: RS42
• Size: 20×10
• Finish: Matte Black
• Tires: 275/30/20
• Suspension: KW H.A.S

Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.

The silver Audi RS5 B8 cuts a clinical, razor-sharp silhouette through the modern urban landscape. Its refined aesthetic balances factory elegance with a aggressive, low-slung stance.

Massive 20-inch BC Forged wheels provide a menacing contrast against the muted silver paintwork. These matte black rollers fill the arches perfectly thanks to the precise KW suspension setup. This machine defines the peak of German engineering wrapped in a dark, tactical skin.

View gallery and fitment of this Audi RS5 →

Audi R8 on Velos S3 3PC Wheels

This Grey Audi R8 is running 20×9 and 20×12-inch Velos S3 3PC wheels finished in Monaco Copper. Paired with 245-30-20 and 325-25-20 tires.

Wheel Specs

• Brand: Velos
• Model: S3 3PC
• Size: 20×9 and 20×12
• Finish: Monaco Copper
• Tires: 245-30-20 and 325-25-20

The Velos S3 three-piece wheels offer superior unsprung weight reduction for the Audi R8 platform. Their Monaco Copper finish provides a sophisticated visual contrast against the muted grey exterior paint.

Owners must utilize 20x9 front and 20x12 rear sizing for optimal fender clearance. Precision tire fitment requires 245-30-20 fronts and 325-25-20 rears to ensure mechanical grip remains balanced.

View gallery and fitment of this Audi R8 →

Audi RS7 C7 on BBS FI-R Wheels

This Grey Audi RS7 C7 is running 20-inch BBS FI-R wheels finished in Platinum Silver.

Wheel Specs

• Brand: BBS
• Model: FI-R
• Size: 20
• Finish: Platinum Silver

The Nardo Grey Audi RS7 sits low with a menacing, predatory stance. Those BBS FI-R wheels in Platinum Silver define the car’s sophisticated, industrial edge.

Precision milling elevates these lightweight forged alloys above the standard factory rolling stock. This build is a masterclass in aggressive understatement and German mechanical perfection.

The iconic silhouette commands respect through technical refinement rather than loud, desperate aesthetic choices. It remains a titan of the Autobahn dressed in tailored, high-performance finery.

View gallery and fitment of this Audi RS7 →

Audi RS3 8V Sedan on BC Forged EH168 Wheels

This Black Audi RS3 8V Sedan is running 19×9.5-inch BC Forged EH168 wheels.

Wheel Specs

• Brand: BC Forged
• Model: EH168
• Size: 19×9.5
• Offset: +42 and +45

Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.

Midnight paint swallows the light, hiding every sharp Audi RS3 body line. Brushed BC Forged EH168 wheels fill the arches with surgical, aggressive precision.

The 19x9.5 setup demands total respect on any winding asphalt canyon road. This sedan radiates a cold, calculated fury that silences every lesser machine.

View gallery and fitment of this Audi RS3 →