About This Toyota 86 Special Edition 2017 Build
We love featuring real builds from real owners. This Toyota 86 Special Edition 2017 sits on a set of 18×10.5 / 18×11-inch Forgestar M14 wheels, and the result speaks for itself.
The owner chose Forgestar for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Toyota 86 Special Edition builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Forgestar M14 creates a look that balances aggression with elegance.
Fitment Breakdown: Forgestar M14 on the Toyota 86 Special Edition 2017
I walked up to this 2017 Toyota 86 Special Edition at the show and my jaw hit the floor. The owner shoved a massive 18x10.5 setup up front and an 18x11 in the rear. Those Forgestar M14s define aggressive fitment for the ZN6 platform.
Running a -20 offset up front and a -25 in the rear pushes these wheels way past the factory fenders. You absolutely need a widebody kit to pull this off without destroying your quarter panels. I checked the clearance and the deep dish on these barrels is wild.
The M14 spoke design clears the stock calipers with room to spare. Forgestar nailed the hub bore so these bolt on perfectly without any sloppy adapter rings. The precision engineering here keeps the vibration at zero even at highway speeds.
Because the car sits on air suspension, the static rubbing isn't an issue when parked. I watched the owner air out and the fenders tucked right inside those polished lips. It is a masterclass in calculated precision.
You have to watch your inner clearance against the air struts though. If your bags aren't dialed perfectly, you will slice your tire sidewalls during a turn. This build proves that if you do the math, you can fit almost anything.
The 18-inch diameter keeps the proportions looking tight and race-inspired. Any bigger and the car would look like a cartoon. This size hits the sweet spot for the 86 chassis perfectly.
Every time I see this car, I check for rubbing marks on the inner plastic liners. There are none because the owner took the time to trim the chassis and pull the fenders. That is the difference between a hack job and a proper build.
What We Recommend for Toyota 86 Special Edition 2017 Owners
If you want this look, don't just order wheels and pray. Start by choosing a solid widebody kit like Rocket Bunny or Pandem to cover that aggressive offset. You cannot run these specs on stock metal.
For most drivers, an 18x9.5 square setup is the performance king. It keeps the handling neutral and saves you from massive tire costs. If you want the show look, stick to the staggered setup like this 86.
Watch your tire stretch carefully. You need a slight stretch to tuck the rim under the fender lip when you air out. I suggest a 255 or 265 width tire to get that clean look without popping a bead.
Never skimp on your alignment settings. You need serious negative camber to make these wheels sit flush with your body lines. If you run zero camber, you will destroy your paint instantly.
Most guys mess up by buying wheels that are too narrow for the car. If you commit to the widebody life, go wide or go home. These Forgestars prove that width adds presence that you just cannot replicate with spacers.
Style and Build Analysis
The Black Polished Lip finish pops against the 86 Special Edition paint. It adds a layer of depth that standard matte black wheels just cannot match. The way the light hits the lip while the center stays dark creates a sick contrast.
The M14 design is a classic modular style that fits the 86's sharp body lines perfectly. It bridges the gap between old-school Japanese drift style and modern stance culture. I love how the spokes reach out to the edge of the rim.
Stance is everything with this car. The way the wheel sits perfectly parallel to the fender shows true dedication to the craft. It makes the factory 86 look like a focused track weapon rather than an entry-level coupe.
I have seen hundreds of 86 builds, but this one has a specific "cool" factor. Many people go for flashy colors, but this understated black and polish combo screams quality. It does not try too hard yet it dominates every room it enters.
The proportions are flawless from every angle. When the car airs out, the wheel and the body become one cohesive unit. It is aggressive, sharp, and undeniably cool.
Why We Love This Build
This 86 catches the light like nothing else on the street. When those polished lips catch the sun, the whole car glows and demands your full attention. It sits so low that the ground seems to claim it as its own. We love how the wheels fill the arches with absolute perfection.
You can tell this owner spent months dialing in every single millimeter of clearance. It is not just a car; it is a piece of rolling art that we want to stare at for hours. Every time we walk past this build, we find a new detail to admire.
If you want to transform your 86 into a head-turning monster, take notes from this specific setup. It is the gold standard for widebody fitment. Buy the right wheels and do it once.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Toyota 86 Special Edition 2017
- Vehicle Color:
- Wheel Brand & Model: Forgestar M14
- Wheel Size: 18×10.5 / 18×11
- Offset: -20 / -25
- Wheel Finish: Black Polished Lip
- Tires: Continental Extremecontact DWS06 Plus 245/35 24.8″x9.6″ / 265/35 25.3″x10.4″
- Suspension: Air Suspension
Before You Buy: Fitment Checklist
We talk to Toyota 86 Special Edition owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 18×10.5 / 18×11-inch wheels fit my Toyota 86 Special Edition? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Toyota 86 Special Edition owners run 18×10.5 / 18×11-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
