About This Scion FR-S Base 2016 Build
We love featuring real builds from real owners. This Scion FR-S Base 2016 sits on a set of 18×9.5 / 18×9.5-inch Anovia Treble wheels, and the result speaks for itself.
The owner chose Anovia for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Scion FR-S Base builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Anovia Treble creates a look that balances aggression with elegance.
Fitment Breakdown: Anovia Treble on the Scion FR-S Base 2016
I walked around this FR-S for an hour at the show, and the fitment is spot on. We are looking at 18x9.5 Anovia Treble wheels stuffed into all four corners. That square 9.5-inch width completely transforms the look of this chassis.
The +35 offset is the secret sauce here. It pushes the face of the wheel right out to the edge of the fender. You get that aggressive stance without needing a ridiculous amount of camber.
Caliper clearance on the stock FR-S brakes is a non-issue with this design. The Treble spokes have enough curve to clear the calipers with room to spare. You will not need spacers to make these clear the hubs.
The hub bore fits perfectly on the Toyota platform. We hate dealing with hub rings that melt or crack, but these bolt right up. It makes the installation process smooth and vibration-free.
The barrel depth on these 18x9.5 wheels gives the car a deep, concave presence. It adds a layer of aggression that the stock skinny setup lacks. The design balances the weight well across the axle.
Since the owner is running coilovers, the fender gap is non-existent. You have to be careful with your dampening settings, though. If you go too soft, you might kiss the inner fender liner on big dips.
Watch those front fender liners during sharp turns. With a 9.5-inch width, you are pushing the limits of the factory arch. We suggest a slight roll if you plan on dropping the car lower than this.
What We Recommend for Scion FR-S Base 2016 Owners
If you own an FR-S, stop running those narrow factory wheels. 18x9.5 is the golden ratio for this platform. It fills the wheel wells without ruining the steering geometry.
We always suggest a square setup like this one. Rotating your tires is key when you drive as hard as we do. It saves your wallet and keeps the handling predictable in the corners.
Stick to an offset between +35 and +40 for the best results. Anything lower than +35 will poke too much and look like a drift project gone wrong. Anything higher will rub against your suspension struts.
Do not cheap out on your tire choice. A wide wheel needs a sticky tire to actually grip the pavement. We recommend a 245/35 or 255/35 tire to get that slight stretch without looking dangerous.
Watch out for overly aggressive alignment specs. You do not need negative six degrees of camber to make these fit. Keep it sensible so you can actually drive the car home after the meet.
Style and Build Analysis
The chrome finish on these Treble wheels is a bold choice in a world of matte black. It pops against the body lines of the FR-S perfectly. Chrome reflects the tarmac and makes the wheels look like they are spinning even when parked.
The Anovia Treble design features clean, sharp spokes. It echoes the angular aesthetic of the Scion’s front bumper and headlights. The simplicity of the design prevents the car from looking too cluttered.
Proportionally, these wheels dominate the side profile. They make the car look lower and wider than it actually is. It has that classic JDM aggressive stance that we all chase.
Most builds we see today try too hard to be loud. This build keeps it clean and relies on the high-quality finish to do the talking. It reminds me of the golden era of street car tuning.
The sunlight catches the chrome spokes and creates a strobe effect as you walk by. It elevates the base model chassis to a show-ready tier. This is how you build an FR-S with taste.
Why We Love This Build
Seeing this FR-S pull into the lot was a highlight of my year. The chrome Anovia Treble wheels catch every stray beam of light, turning the car into a rolling mirror. We love how the wide 9.5-inch footprint anchors the car, giving it the planted, predatory stance it deserves. It is rare to see someone nail the offset so perfectly on a daily driver.
This car proves that you do not need a wild widebody kit to command attention. You just need the right wheels, a solid set of coilovers, and the guts to run a polished finish. This build is raw, honest, and absolutely brilliant. Go get your own set and start turning heads.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Scion FR-S Base 2016
- Vehicle Color:
- Wheel Brand & Model: Anovia Treble
- Wheel Size: 18×9.5 / 18×9.5
- Offset: 35 / 35
- Wheel Finish: Chrome
- Tires: Accelera PHI 225/40 25.1″x8.9″ / 225/40 25.1″x8.9″
- Suspension: Coilovers
Before You Buy: Fitment Checklist
We talk to Scion FR-S Base owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 18×9.5 / 18×9.5-inch wheels fit my Scion FR-S Base? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Scion FR-S Base owners run 18×9.5 / 18×9.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
