About This Kia Optima Special Edition 2020 Build
We love featuring real builds from real owners. This Kia Optima Special Edition 2020 sits on a set of 19×8.5 / 19×8.5-inch Rotiform KPS wheels, and the result speaks for itself.
The owner chose Rotiform for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Kia Optima Special Edition builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Rotiform KPS creates a look that balances aggression with elegance.
Fitment Breakdown: Rotiform KPS on the Kia Optima Special Edition 2020
I walked up to this Kia Optima at the show and immediately knew the fitment was dialed. The owner bolted up a square set of 19x8.5 Rotiform KPS wheels at all four corners. That 8.5-inch width hits the sweet spot for the Optima chassis without looking awkward or pushed too far past the fenders.
The +35 offset is aggressive enough to push those wheels right out to the edge of the sheet metal. It completely eliminates that sunken look we usually hate on factory Kia setups. You get a flush, purposeful stance that makes the car look significantly wider than stock.
Caliper clearance is a total non-issue with this specific spoke design. The Rotiform KPS arches outward just enough to clear the factory Special Edition brakes with room to spare. You will not need any spacers to run these safely.
Because the car sits on air suspension, the fitment changes the second the owner hits the switch. When aired out, the tires tuck perfectly against the inner fender liners. There is no ugly gap between the rubber and the metal.
I inspected the hub bore closely to ensure a proper vibration-free experience. These wheels center perfectly on the Kia hubs, which keeps the steering wheel dead steady at highway speeds. Always check your hub rings if you go with aftermarket options like these.
The barrel depth on the KPS gives the wheel a nice, subtle concave profile that draws the eye inward. It avoids that flat-faced look that ruins so many otherwise cool sedan builds. The design feels purposeful and technical.
You need to watch your clearance on the front fenders if you plan to drive low. Keep an eye on the plastic fender liners where the tire might catch on full lock. A light roll of the fenders goes a long way if you plan to drive slammed.
What We Recommend for Kia Optima Special Edition 2020 Owners
If you want this look, stick to the 19-inch diameter. It fills the wheel well just right without sacrificing too much ride quality. Anything larger starts to look like a carriage wheel, and anything smaller gets lost in the Optima's long body lines.
For offsets, keep that +35 to +38 range on your radar. If you go lower than +30, you will likely fight rubbing issues every time you hit a bump. Save yourself the headache and stick to the specs that actually work with the geometry.
We prefer a square setup for this car. It lets you rotate your tires for even wear and keeps the handling predictable. Staggered setups on a front-wheel-drive Kia just introduce unnecessary understeer and tire fitment nightmares.
Do not over-stretch your tires unless you love replacing wheels from potholes. Run a 235/40/19 or 245/35/19 tire to keep enough sidewall for daily protection. A little bit of meat on the rim saves your finish from curb rash.
Avoid cheap, heavy cast wheels if you can swing the budget. The Rotiform KPS offers a great balance of weight and durability for the price. Quality wheels make a massive difference in how the car feels when you push it through a corner.
If you have the stock suspension, prepare for a massive wheel gap. These wheels look best when you drop the car by at least an inch or two. Do not try to make aggressive wheels work on a stock-height Optima.
Style and Build Analysis
The choice of a black finish on this Special Edition Optima creates a mean, monochromatic vibe. It hides the brake dust and makes the wheel design pop against the lighter paint of the car. It is a classic look that refuses to go out of style.
The KPS design features those classic multi-spoke lines that feel modern yet nostalgic. It complements the sharp, aggressive edges of the 2020 front fascia perfectly. The wheels do not overpower the car; they enhance its natural silhouette.
Proportions are everything in this game, and this build nails the ratio of rubber to metal. The black spokes look like they are spinning even when the car is parked at the show. It creates a sense of motion that makes the Optima look fast standing still.
Compared to other builds we have featured, this one stands out for its restraint. Many owners go too wild with neon colors or massive lips that ruin the drivability. This setup respects the factory design language while adding a layer of custom grit.
I love how the light plays across the black finish during the golden hour. It captures deep shadows in the spokes while reflecting the sunset off the rim edge. It makes the whole car look like a cohesive, high-end project.
Why We Love This Build
This Optima is a masterclass in clean, aggressive styling. When the air suspension drops the chassis, the black Rotiforms disappear into the arches for a perfectly tucked, menacing stance. The way the paint reflects off the dark finish creates a premium, unified look that demands attention at every meet.
We see a lot of Kias, but this one stops us in our tracks because every detail feels intentional. It takes a humble sedan and turns it into a road-going piece of art without losing its soul. It is exactly the kind of build that makes us fall in love with car culture all over again.
You need to see this fitment in person to believe it. Go get your Rotiforms and get that stance dialed.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Kia Optima Special Edition 2020
- Vehicle Color:
- Wheel Brand & Model: Rotiform KPS
- Wheel Size: 19×8.5 / 19×8.5
- Offset: 35 / 35
- Wheel Finish: Black
- Tires: Toyo Tires Proxes 225/35 25.2″x8.9″ / 225/35 25.2″x8.9″
- Suspension: Air Suspension
Before You Buy: Fitment Checklist
We talk to Kia Optima Special Edition owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 19×8.5 / 19×8.5-inch wheels fit my Kia Optima Special Edition? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Kia Optima Special Edition owners run 19×8.5 / 19×8.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
