About This INFINITI Q60 Premium 2017 Build
We love featuring real builds from real owners. This INFINITI Q60 Premium 2017 sits on a set of 20×10.5 / 20×10.5-inch Ferrada CM2 wheels, and the result speaks for itself.
The owner chose Ferrada for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of INFINITI Q60 Premium builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Ferrada CM2 creates a look that balances aggression with elegance.
Fitment Breakdown: Ferrada CM2 on the INFINITI Q60 Premium 2017
I walked around this Q60 for twenty minutes straight. The Ferrada CM2 setup in a square 20x10.5 configuration hits differently than anything else I have seen this year. That 25 offset pushes the wheels right to the edge of the fenders.
You get a massive amount of concave depth with these specs. The CM2 design is famous for that deep, aggressive center profile. It changes the entire silhouette of the Q60.
We checked the brake clearance thoroughly during our walkaround. The spokes clear the factory Premium calipers with room to spare. You will not need any spacers to run this specific setup.
The hub bore fits perfectly on the Infiniti platform. We love when a wheel bolts on without any vibration-inducing hub rings. It makes for a much smoother drive on the highway.
I noticed the fender gap is tight thanks to those coilovers. You have to be careful with your ride height settings here. If you slam it too low, you will definitely kiss the inner liner on big bumps.
The 10.5-inch width puts a lot of rubber on the road. You need to manage your tire sizing to avoid rubbing the fender tabs. Keep your sidewalls tight if you plan to tuck these wheels.
What We Recommend for INFINITI Q60 Premium 2017 Owners
If you want this look, prepare to commit to a proper alignment. You will need a bit of negative camber to tuck that 25 offset under the front fenders. It keeps the setup looking flush rather than poking out like a tractor.
We usually suggest a staggered setup for daily drivers, but the square look on this car is undeniable. Running the same wheel size all around makes tire rotations a breeze. It also gives the car a much wider, more purposeful stance.
Watch your tire choice carefully when running a 10.5 width. A slight stretch helps with clearance, but don't overdo it. You want enough meat to protect the rim from potholes.
Most guys make the mistake of buying wheels that are too narrow. On the Q60, you need at least a 10-inch width to get that concave look. Anything skinnier will just look sunken and weak.
Do not skimp on your coilover setup either. Cheap suspension will ruin the way this car handles those wide wheels. Invest in quality damping so you can actually enjoy the aggressive fitment.
Style and Build Analysis
The Machined Silver finish is a masterclass in contrast. Against the factory Q60 paint, the silver pops and catches the sunlight in a way that black wheels never could. It highlights the intricate spoke design of the CM2 perfectly.
The Q60 has very fluid, organic lines from the factory. These angular, multi-spoke wheels provide the perfect visual tension. It makes the car look like it is moving even when it is parked dead still.
I have seen plenty of Q60s running generic five-spoke wheels. This build stands out because the Ferrada CM2 design respects the proportions of the body. The wheels do not overwhelm the car, they complete it.
The road presence is simply unmatched. When this car rolls down the boulevard, the wheels demand attention. You can see the light dancing across the machined surface from three blocks away.
We often see builds that look good in photos but fail in person. This car is the opposite. The closer you get, the more you appreciate the quality of the finish and the precision of the fitment.
Why We Love This Build
Seeing this Q60 in the wild was a highlight of my week. The way the Machined Silver catches the sunset while the car sits low on those coilovers is pure art. It turns a standard luxury coupe into a head-turning street machine.
We love builds that push the envelope without ruining the drivability of the car. This setup nails the balance between aggressive stance and clean, refined aesthetics. It is exactly how a Q60 should look.
If you want to transform your own ride, look no further than this combination. It is a bold, beautiful statement that belongs on every enthusiast's bucket list. This is the definition of a perfect fitment job.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: INFINITI Q60 Premium 2017
- Vehicle Color:
- Wheel Brand & Model: Ferrada CM2
- Wheel Size: 20×10.5 / 20×10.5
- Offset: 25 / 25
- Wheel Finish: Machined Silver
- Tires: Hankook Ventus V12 Evo 2 275/30 26.5″x10.8″ / 275/30 26.5″x10.8″
- Suspension: Coilovers
Before You Buy: Fitment Checklist
We talk to INFINITI Q60 Premium owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×10.5 / 20×10.5-inch wheels fit my INFINITI Q60 Premium? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of INFINITI Q60 Premium owners run 20×10.5 / 20×10.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
