About This INFINITI Q60 3.0 2017 Build
We love featuring real builds from real owners. This INFINITI Q60 3.0 2017 sits on a set of 20×10 / 20×11-inch Ferrada F8-FR5 wheels, and the result speaks for itself.
The owner chose Ferrada for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of INFINITI Q60 3.0 builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Ferrada F8-FR5 creates a look that balances aggression with elegance.
Fitment Breakdown: Ferrada F8-FR5 on the INFINITI Q60 3.0 2017
I walked around this Q60 at the show, and the fitment on these Ferrada F8-FR5 wheels is absolute perfection. We see a lot of aggressive setups, but running a 20x10 front and 20x11 rear takes real guts. The 25 offset up front pushes the face right to the edge of the fender line.
That 50 offset in the rear is the secret sauce for this specific chassis. It tucks the massive 11-inch barrel just enough to clear the inner liner while maintaining a killer stance. You get that deep concave look without turning your tires into shredded rubber on every bump.
Caliper clearance is usually a nightmare on the 3.0T, but these Ferradas clear the factory brakes with room to spare. I checked the gap, and we are looking at plenty of space for larger aftermarket big brake kits later on. You do not need spacers to make these sit pretty.
The hub bore sits right where it needs to be for the Infiniti platform. We always recommend using high-quality hub-centric rings to keep vibrations at zero. When you bolt these up, the wheel seats perfectly flush against the rotor hat.
Because the car sits on coilovers, the suspension geometry changes the way the tire interacts with the fender. We dialed the dampening to keep the travel stiff enough to prevent any rubbing during hard cornering. You get a firm ride that matches the sharp aesthetic.
Watch out for the front fender liners on tight turns if you go any lower than this build. We noticed a tiny bit of potential contact near the front bumper clips during full lock. A quick trim of the plastic liner solves that issue entirely.
The depth of the lip on these 20x11 rears is staggering to see in person. Ferrada nailed the spoke design, which pulls your eye toward the center of the wheel. It creates a bold, aggressive profile that makes the Q60 look much wider than the factory sheet metal suggests.
What We Recommend for INFINITI Q60 3.0 2017 Owners
If you want to replicate this look, stick to the 20-inch diameter. Anything smaller gets swallowed up by the massive wheel arches of the Q60. We find that 19s can look a bit too sporty, while 20s provide that luxury-meets-aggression vibe that this car demands.
Do not even think about a square setup if you want that factory-plus performance feel. The Q60 thrives on a staggered arrangement to keep the rear planted under the 3.0T's torque. Keep the wider wheels in the back to handle the power delivery.
We always advise owners to invest in a quality coilover set rather than just lowering springs. You need the adjustability to fine-tune your poke and avoid fender rub. If you cut corners on the suspension, you will regret it the moment you hit a pothole.
Tire selection is just as important as the wheel choice itself. We suggest a slight stretch to tuck that sidewall inside the fender lip. It keeps your paint clean and prevents the tires from rubbing the metal under heavy compression.
Common mistakes? Buying cheap wheels with improper offsets is the fastest way to ruin this car's handling. We see too many people forcing wheels with low offsets that stick out three inches past the fender. Stick to our tested specs to ensure you look cool without looking like a rolling disaster.
Style and Build Analysis
The black finish on these F8-FR5s looks sinister against the curves of the Q60. It hides the brake dust and makes the car look like it belongs on a dark, rainy city street. The gloss adds a layer of depth that really pops when the sun hits the spokes.
This design is busy enough to catch your eye but clean enough to keep the car feeling classy. The spokes extend all the way to the outer edge of the rim. This design trick makes the wheels look significantly larger than they actually are.
I love how the stance changes the entire personality of the Infiniti. The stock car looks like a cruiser, but this setup makes it look like a street fighter. It completely transforms the proportions of the body.
When I compare this to other builds we have featured, this one stands out for its restraint. Many owners go way too loud with bright colors, but the black-on-black approach works best here. It is subtle, refined, and undeniably aggressive.
The road presence is off the charts, especially when the car is rolling. The spokes create a hypnotic blur that highlights the massive barrel depth. You cannot help but turn your head when this thing cruises past a crowd.
Why We Love This Build
I cannot stop thinking about the way this Q60 sits on the pavement. The black finish drinks the light, making the car look like a solid shadow moving down the highway. Every time the light hits the concave face, the whole car comes alive.
We see thousands of cars, but this build hits different because it respects the lines of the Infiniti. It does not try too hard; it just finds that perfect sweet spot of fitment and attitude. It is the kind of car that makes you want to go out and work on your own project immediately.
When you see the wheels tucked just right, you know the owner put in the work. This is how a modern coupe should look. Do it right, and the road is yours.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: INFINITI Q60 3.0 2017
- Vehicle Color:
- Wheel Brand & Model: Ferrada F8-FR5
- Wheel Size: 20×10 / 20×11
- Offset: 25 / 50
- Wheel Finish: Black
- Tires: Continental ExtremeContact Sport 255/35 27″x10″ / 305/30 27.2″x12″
- Suspension: Coilovers
Before You Buy: Fitment Checklist
We talk to INFINITI Q60 3.0 owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×10 / 20×11-inch wheels fit my INFINITI Q60 3.0? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of INFINITI Q60 3.0 owners run 20×10 / 20×11-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
