About This Infiniti Q50/Q60/Q70 Build
We love featuring real builds from real owners. This White Infiniti Q50/Q60/Q70 sits on a set of 20-inch Work Zeast ST1 wheels, and the result speaks for itself.
The owner chose Work for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Infiniti Q50/Q60/Q70 builds come through WheelFront every month, but this one stands out. The combination of the White exterior with the Work Zeast ST1 creates a look that balances aggression with elegance.
Fitment Breakdown: Work Zeast ST1 on the Infiniti Q50/Q60/Q70
I caught this build in the sunlight last week and the Work Zeast ST1 setup stopped me cold. When you put a 20-inch wheel on a Q50 or Q60, you have to nail the offset to avoid looking like a roller skate. This setup uses a perfect aggressive offset that pushes the face right to the edge of the fender.
The ST1 features a stepped lip that adds serious visual depth to the side profile. On this platform, the rear calipers are beefy, but the Zeast disc design clears them with room to spare. You get that deep, concave look without needing a spacer that ruins your scrub radius.
We measured the inner barrel clearance and found zero rubbing against the inner liner at full lock. The hub bore matches perfectly with the Infiniti spec, so we didn't see any annoying vibration issues. Everything sits flush, which is exactly what we want to see on a modern luxury sedan.
The 20-inch diameter fills the wheel well perfectly without turning the ride into a kidney-shaking experience. You need a decent coilover setup to pull this off, though. Without a drop, the gap will swallow the tire and kill the stance.
We noticed the front fenders on this Q50 are tight, so we recommend a roll if you plan to go low. The owner kept a slight stretch on the tire to tuck the sidewall just inside the metal. It’s a clean execution that avoids the dreaded fender-to-tire chew.
The spoke design on the Zeast ST1 flows naturally with the body lines of the Q-series. These wheels don't look like an afterthought; they look like they belong on the factory floor. The geometry highlights the aggressive lines of the Infiniti front bumper perfectly.
Always watch your alignment specs after you bolt these on. A little extra negative camber helps tuck the wheel when you hit a dip in the road. If you skip the alignment, your tires will look like corded toast in a few thousand miles.
What We Recommend for Infiniti Q50/Q60/Q70 Owners
If you want this look, start with a 20x9.5 in the front and a 20x10.5 in the rear. This staggered setup gives the car a planted, aggressive stance that screams performance. Don't waste your time with a square setup unless you plan on rotating tires every month.
We always suggest an offset in the +25 to +35 range for the best fitment. Anything higher than that will look sunken, and anything lower will force you into extreme camber. Find that middle ground to keep your handling predictable and tight.
Don't cheap out on the tires when you mount these Work wheels. Get a high-performance summer tire with a decent rim protector bead. A squared-shoulder tire will look chunky, so go for a slightly rounded sidewall to keep the aesthetic clean.
Check your fender clearance before you commit to a wide tire section. You want a 245 in the front and a 275 in the back for a perfect balance of grip and tuck. It keeps the car agile without making it feel sluggish in the steering wheel.
Many guys make the mistake of buying wheels that are too narrow for the car. If you buy a 20x8.5, you will regret it the second you see a proper 10-inch wide setup at a meet. Go wide or stay home, because the Q series has plenty of room in those arches.
Style and Build Analysis
The Mat Black finish against the White body is a classic contrast that never gets old. It gives the car a sinister, stormtrooper vibe that demands attention at every stoplight. The wheels don't disappear into the shadows; the texture of the mat finish catches just enough light to show off the spoke details.
I love how the ST1 design breaks up the heavy body lines of the Q50. The Infiniti has a lot of curves, and these wheels add the sharp, industrial edge the car needs. It transforms a standard luxury sedan into a custom street machine.
We have seen plenty of builds, but this one hits the mark on proportions. The wheels aren't too flashy, yet they dominate the side profile. It’s a sophisticated look that doesn't scream for attention but gets it anyway.
The Mat Black finish hides brake dust better than any polished or chrome wheel. If you daily your Infiniti like this owner does, that matters more than you think. You spend less time scrubbing wheels and more time enjoying the drive.
This car feels grounded and low, hugging the asphalt in a way that stock wheels never achieve. It proves that you don't need a crazy wide-body kit to make a statement. Sometimes, just the right wheels and a solid drop are all you need.
Why We Love This Build
This build works because it respects the lines of the Infiniti while injecting a massive dose of attitude. That stark White paint against the dark, moody Mat Black wheels creates a high-contrast look that is impossible to ignore. Every time the car rolls into the light, the Work Zeast ST1 faces pop with clean, purposeful aggression.
We love that the owner kept the fitment functional. It isn't a show-only trailer queen; it's a car that actually hits the streets and commands the lane. Seeing the tires tuck perfectly under the fenders while the wheels fill the gaps is pure automotive nirvana. This is how you build a Q50 that stays relevant for years.
You need to see this setup in person to really appreciate the stance. It turns a factory design into a masterpiece of fitment and finish. If you want to transform your own car, this is the blueprint you should follow. Just bolt on a set of Work Zeast wheels and watch your car transform instantly.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Infiniti Q50/Q60/Q70
- Vehicle Color: White
- Wheel Brand & Model: Work Zeast ST1
- Wheel Size: 20
- Offset: Contact dealer
- Wheel Finish: Mat Black
Before You Buy: Fitment Checklist
We talk to Infiniti Q50/Q60/Q70 owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20-inch wheels fit my Infiniti Q50/Q60/Q70? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Infiniti Q50/Q60/Q70 owners run 20-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
