About This INFINITI Q50 Premium 2015 Build
We love featuring real builds from real owners. This INFINITI Q50 Premium 2015 sits on a set of 19×8.5 / 19×8.5-inch XXR 559 wheels, and the result speaks for itself.
The owner chose XXR for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of INFINITI Q50 Premium builds come through WheelFront every month, but this one stands out. The combination of the exterior with the XXR 559 creates a look that balances aggression with elegance.
Fitment Breakdown: XXR 559 on the INFINITI Q50 Premium 2015
I walked around this Q50 for ten minutes just to see how the XXR 559 sits in the wheel wells. These 19x8.5 wheels with a +20 offset push the face right out to the edge of the fender. It gives the car a much wider footprint than the factory setup.
The +20 offset is aggressive for a stock body Q50. You get that flush look without needing massive spacers to clear the suspension. It really pulls the wheels out to meet the body lines perfectly.
Caliper clearance on this Premium model is a non-issue with this design. The XXR 559 has plenty of barrel room for the stock INFINITI brakes. You won't struggle with any annoying contact points during the install.
The 66.1mm hub bore matches the Q50 perfectly. I always tell guys to avoid hub rings if they can, and here you do not need them. It makes for a clean, vibration-free ride on the highway.
Since the owner threw on lowering springs, the fender gap looks tight and aggressive. The drop tucks the tire just enough to look sporty without compromising daily drivability. It is the exact stance this chassis needs.
Watch out for the front liner if you hit a dip at high speed. The +20 offset puts the tire close to the inner plastic liner during a full turn. You might hear a slight rub if your tires are too chunky.
The spoke design is subtle but effective. It creates a deep, concave look that draws the eye toward the center cap. The whole setup feels balanced and purpose-built for the street.
What We Recommend for INFINITI Q50 Premium 2015 Owners
If you want this look, stick to the 19-inch diameter. It fills the wheel arch of the Q50 better than an 18-inch wheel ever could. It keeps the proportions of the car looking modern and sharp.
For offsets, stay between +20 and +35 for a square setup. Anything lower than +20 will start to poke too far past the fender. You want to avoid that cheap, awkward look where the tire sticks out too far.
A square 8.5-inch setup is perfect for the daily driver. It allows you to rotate your tires properly to get more life out of them. It also keeps the handling predictable and neutral in the corners.
Do not go crazy with tire stretch unless you are going for a pure show car build. Run a 245/40/19 tire to keep enough sidewall for comfort. Your local roads will thank you when you hit a pothole.
Common mistakes usually involve buying wheels with the wrong lug pattern or offset. Always double-check your bolt pattern is 5x114.3 before you pull the trigger. A bad offset choice will ruin your day at the tire shop.
Style and Build Analysis
The Gunmetal finish is the secret sauce here. It provides a moody, industrial contrast against the glossy body paint. It looks refined but mean at the same time.
The XXR 559 spoke pattern creates a sense of motion even when the car is parked. You get nice light play across the spokes as you walk around the vehicle. It elevates the visual quality of the wheels significantly.
Proportions are everything on a sedan like the Q50. This setup fills the space without making the car look like a cartoon. It strikes that rare balance between aggressive aftermarket style and factory-like fitment.
I have seen plenty of Q50 builds with flashy, chrome wheels that look tacky. This Gunmetal setup feels more grounded and serious. It respects the lines of the car while adding some much-needed edge.
The stance makes the car look planted and ready to attack a corner. It hides the softness of the stock body and makes the car look lighter. This is exactly what a sport sedan should look like in the wild.
Why We Love This Build
This Q50 hits different because it feels finished. The Gunmetal 559s catch the sunset light perfectly, highlighting the sharp lines of the wheels against the dark paint. It fills the arches with a purpose that factory wheels just cannot match.
We see a lot of cars at the track and the meets, but this one sticks in your memory. It proves that you do not need a massive budget to completely change the personality of your daily driver. This is a masterclass in choosing the right offset and finish.
When you park this car, you look back at it. It is clean, functional, and looks fast even standing still. Go get yourself a set and transform your ride today.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: INFINITI Q50 Premium 2015
- Vehicle Color:
- Wheel Brand & Model: XXR 559
- Wheel Size: 19×8.5 / 19×8.5
- Offset: 20 / 20
- Wheel Finish: Gunmetal
- Tires: Dunlop SP Sport Maxx GT 245/45 27.7″x9.6″ / 245/45 27.7″x9.6″
- Suspension: Lowering Springs
Before You Buy: Fitment Checklist
We talk to INFINITI Q50 Premium owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 19×8.5 / 19×8.5-inch wheels fit my INFINITI Q50 Premium? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of INFINITI Q50 Premium owners run 19×8.5 / 19×8.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
