About This Audi RS5 B9 Build
We love featuring real builds from real owners. This Grey Audi RS5 B9 sits on a set of 20×10-inch Blaque Diamond BD-77 wheels, and the result speaks for itself.
The owner chose Blaque Diamond for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Audi RS5 builds come through WheelFront every month, but this one stands out. The combination of the Grey exterior with the Blaque Diamond BD-77 creates a look that balances aggression with elegance.
Fitment Breakdown: Blaque Diamond BD-77 on the Audi RS5 B9
I stood right next to this B9 RS5 when it rolled into the lot, and the fitment is spot on. We are looking at a 20x10 setup that fills those wide fenders perfectly. The aggressive width transforms the stance immediately.
The Blaque Diamond BD-77 uses a specific offset that pushes the face right to the edge of the fender. We checked the caliper clearance, and these spokes tuck perfectly around the massive RS brakes. You won't need any spacers to make this look right.
That 20-inch diameter is the sweet spot for the B9 chassis. It keeps the car looking modern without killing the ride quality. The hub bore matches the Audi factory specs, so you get a vibration-free ride every time.
Look at the barrel lip depth on these BD-77s. It gives the wheel a deep, concave profile that screams performance. The spoke design draws your eye straight to the center cap.
If you run a 275/30/20 tire, you are golden. We didn't see any rubbing on the inner fender liners during full lock. The tire profile keeps the sidewall firm for those tight corners.
If you drop this car on lowering springs, watch your clearance closely. A slight tuck will happen, but it looks killer. Just keep an eye on the front fender tabs if you go really low.
This setup balances form and function like a pro. You get the wide look without needing to hack up your wheel wells. It is a true plug-and-play upgrade for the B9.
What We Recommend for Audi RS5 B9 Owners
If you own an RS5, stop hunting for cheap cast wheels. We recommend sticking to a 20x10 or 20x10.5 setup for the best results. Anything narrower just leaves too much gap in those flared arches.
Offset is your best friend on this platform. Aim for an ET25 to ET30 range to keep the wheels flush with the body. Anything higher will look sunken, and anything lower will poke too much.
Forget about staggered setups on the B9. Keep it square so you can rotate your tires and keep that Quattro system happy. Staggered wheels on these cars just mess with the differential long-term.
We see way too many guys run tires that are way too skinny. A 275/30/20 is the gold standard for this width. It provides a little rim protection and fills the gap nicely.
Don't be afraid to pull the trigger on a quality set of coilovers to finish the look. A modest drop makes these 20s pop. Just make sure you get a professional alignment afterward to save your tread.
Style and Build Analysis
The Silver with Brushed Face finish is a masterclass in subtlety. Against the Grey body, it creates a monochromatic look that feels expensive. It is not loud, but it demands your attention.
The BD-77 design features sharp, angular spokes that mimic the aggressive lines of the B9. It matches the factory design language perfectly. The brushed finish catches the sun and creates a killer highlight.
Proportions are everything with these Audis. The 20-inch wheels fill the wheel wells without looking like a donk. The car looks planted and ready to attack the next canyon road.
Compared to other builds we have featured, this one stays classy. It avoids the neon colors and wild designs for something timeless. It looks like it could have rolled off the assembly line this way.
The road presence is undeniable when this car is in motion. The light dances across the brushed face as the wheels rotate. It is the ultimate upgrade for a daily-driven performance machine.
Why We Love This Build
I love this build because it stays true to the Audi DNA. The Grey paint and Silver finish create a clean, sharp look that never goes out of style. The wheels fill the arches just right, giving the RS5 a muscular, athletic silhouette that grabs you from across the parking lot.
When the sun hits the brushed faces, the car comes alive. Every line on the B9 body pops, and the wheels look like they belong there. This is how you modify a modern sports car with class and intent.
This build proves that you do not need to go crazy to stand out. It is a perfect example of picking the right wheel, the right finish, and the right stance. You need to see this setup in person to truly appreciate it.
Go get yourself a set of these wheels and transform your ride today.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Audi RS5 B9
- Vehicle Color: Grey
- Wheel Brand & Model: Blaque Diamond BD-77
- Wheel Size: 20×10
- Offset: Contact dealer
- Wheel Finish: Silver w/ Brushed Face
- Tires: 275/30/20
Before You Buy: Fitment Checklist
We talk to Audi RS5 owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×10-inch wheels fit my Audi RS5? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Audi RS5 owners run 20×10-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
