FIND WHEELS FOR YOUR CAR
SEARCH RESULTS
Nissan GT-R R35 on HRE P40SC Wheels
This White Nissan GT-R R35 is running 21×9.5 and 21×11-inch HRE P40SC wheels finished in Satin Silver. Paired with 285/35/21 and 325/30/21 tires.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 21×9.5 and 21×11
- Offset: ET25 and ET15
- Finish: Satin Silver
- Tires: 285/35/21 and 325/30/21
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The HRE P40SC selection signals a preference for refined, high-performance aesthetics over aggressive trends. This choice highlights a desire for balanced handling and sophisticated GT-R street presence.
White paint paired with satin silver creates a clean, timeless look for this platform. These specs represent a mature approach to aftermarket tuning within the modern supercar scene.
View gallery and fitment of this Nissan GT-R →
BMW M3 E9X on HRE P40SC Wheels
This Black BMW M3 E9X is running 19-inch HRE P40SC wheels.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 19
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The E9X M3 remains a high-water mark for naturally aspirated M performance. Selecting HRE P40SC wheels signals a reverence for the golden era of aftermarket refinement.
These nineteen-inch rollers balance motorsport pedigree with an understated, monochromatic aesthetic. This cohesive setup defines the peak of contemporary BMW street tuning culture.
View gallery and fitment of this BMW M3 →
Aston Martin Vantage on HRE P40SC Wheels
This Black Aston Martin Vantage is running 21-inch HRE P40SC wheels finished in Gloss Gold.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 21
- Finish: Gloss Gold
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The HRE P40SC provides a sophisticated structural upgrade for the Aston Martin Vantage platform. This lightweight monoblock design effectively reduces unsprung mass to enhance overall handling precision.
Selecting twenty-one inch wheels demands careful consideration of tire sidewall profiles for daily comfort. Owners must ensure correct offset specifications to prevent fender liner interference during spirited cornering.
The striking gloss gold finish creates a dramatic visual contrast against the dark bodywork. This specific configuration elevates the aesthetic profile while maintaining the brand's signature elegance.
View gallery and fitment of this Aston Martin Vantage →
BMW 1 series F20 on HRE P40SC Wheels
This Blue BMW 1 series F20 is running 19-inch HRE P40SC wheels finished in Satin Charcoal. Paired with 235/35/19 tires. Suspension is Eibach Lowering Springs.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 19
- Finish: Satin Charcoal
- Tires: 235/35/19
- Suspension: Eibach Lowering Springs
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The HRE P40SC wheels elevate the F20 chassis with superior forged structural rigidity. Their satin charcoal finish provides a sophisticated, technical contrast against the deep blue paintwork.
Owners should pair these nineteen-inch wheels with Eibach springs for ideal fender clearance. This precise combination significantly enhances turn-in response while maintaining essential everyday comfort levels.
View gallery and fitment of this BMW 1 series →
Chevrolet Corvette C6 on HRE P40SC Wheels
This Blue Chevrolet Corvette C6 is running 19×10 and 20×12-inch HRE P40SC wheels. Paired with 285/30/ZR19 and 335/25ZR20 tires.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 19×10 and 20×12
- Tires: 285/30/ZR19 and 335/25ZR20
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The HRE P40SC spoke geometry complements the aggressive lines of the C6 Corvette perfectly. These wheels offer superior brake clearance and ideal proportions for the widebody chassis.
This specific staggered setup fills the wheel wells for a flush, muscular street stance. The wide tire footprint maximizes mechanical grip and improves overall handling performance significantly.
View gallery and fitment of this Chevrolet Corvette →
Chevrolet Corvette C6 on HRE P40SC Wheels
This Red Chevrolet Corvette C6 is running 20×10.5 and 20×13-inch HRE P40SC wheels finished in Satin Charcoal. Paired with 275/30/20 and 345/25/20 tires.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 20×10.5 and 20×13
- Finish: Satin Charcoal
- Tires: 275/30/20 and 345/25/20
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The HRE P40SC provides a sophisticated structural upgrade for the Corvette C6 platform. This forged monoblock design significantly reduces unsprung mass while enhancing overall chassis rigidity.
Achieving this wide 20-inch staggered fitment demands careful attention to fender clearance constraints. Owners must verify proper offset specifications to ensure optimal handling without compromising wheel arch integrity.
View gallery and fitment of this Chevrolet Corvette →
Audi S5 B8 on HRE P40SC Wheels
This White Audi S5 B8 is running 20×10-inch HRE P40SC wheels finished in Brushed.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 20×10
- Offset: 28mm and 21mm
- Finish: Brushed
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The white Audi S5 B8 demands a sophisticated balance of performance and understated luxury. Choosing HRE P40SC wheels signals a driver prioritizing refined engineering over aggressive trends.
These 20x10 brushed rollers anchor the chassis with a timeless, architectural aesthetic. This setup elevates the coupe into a quintessential example of modern aftermarket restraint.
View gallery and fitment of this Audi S5 →
BMW M5 F10 on HRE P40SC Wheels
This Blue BMW M5 F10 is running 21-inch HRE P40SC wheels finished in Gloss Charcoal.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 21
- Finish: Gloss Charcoal
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The HRE P40SC spoke geometry perfectly complements the muscular lines of the F10 M5. Its open design ensures adequate clearance for those massive factory carbon ceramic brake calipers.
The twenty-one inch diameter fills the wheel arches with aggressive, purposeful visual weight. This setup balances track-ready performance with a sophisticated, clean stance for the street.
View gallery and fitment of this BMW M5 →
Mercedes-Benz CLS W218 on HRE P40SC Wheels
This White Mercedes-Benz CLS W218 is running 20×9.5 and 20×11-inch HRE P40SC wheels finished in Gloss Black. Paired with 255 F and 305 R tires. Suspension is KW adjustable coilovers.
Wheel Specs
- Brand: HRE
- Model: P40SC
- Size: 20×9.5 and 20×11
- Finish: Gloss Black
- Tires: 255 F and 305 R
- Suspension: KW adjustable coilovers
HRE wheels are fully forged in the USA. Pricing typically starts at $4,000 per set and increases with size and custom finishes.
The Mercedes-Benz CLS W218 adopts a stark, monochromatic aesthetic in brilliant white. HRE P40SC wheels in gloss black provide a sharp, aggressive visual contrast.
Staggered fitment and lowered suspension create a calculated, wide stance. This build represents a definitive marriage of executive elegance and modern performance culture.
Massive 305 rear tires anchor the machine to the dark pavement. Precise engineering choices elevate this sedan beyond its standard factory luxury origins. Every modification serves a singular purpose of undeniable presence. The result remains refined, purposeful, and strikingly balanced in motion. It captures the essence of sophisticated street tuning without unnecessary excess. This car commands attention through restraint and perfect mechanical geometry. Pure design excellence defines this specific automotive project.
View gallery and fitment of this Mercedes-Benz CLS →