FIND WHEELS FOR YOUR CAR
SEARCH RESULTS
Audi RS6 C8 on Forgeline NW101 Wheels
This Green Audi RS6 C8 is running 22×11-inch Forgeline NW101 wheels finished in Hyper Silver. Paired with 295/30ZR22 tires.
Wheel Specs
- Brand: Forgeline
- Model: NW101
- Size: 22×11
- Finish: Hyper Silver
- Tires: 295/30ZR22
Forgeline one-piece forged monoblock wheels are hand-crafted in Ohio. Pricing typically starts around $2,500 per set depending on size.
This Audi RS6 commands attention through its aggressive stance and deep green finish. The massive Forgeline NW101 wheels anchor the wagon with undeniable mechanical authority.
Hyper Silver finishes contrast perfectly against the dark bodywork and wide rubber setup. Measuring twenty-two inches, these alloys elevate this Avant into a sculpted street predator.
Every polished spoke reinforces its status as the ultimate modern executive hauler. This build remains a masterclass in blending sophisticated luxury with pure asphalt aggression.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on Velgen VFMBX10 Wheels
This White Audi RS6 C8 is running 22×11-inch Velgen VFMBX10 wheels finished in Brushed Tinted.
Wheel Specs
- Brand: Velgen
- Model: VFMBX10
- Size: 22×11
- Finish: Brushed Tinted
The Audi RS6 C8 demands absolute attention when draped in pristine, stark white paint. These massive Velgen VFMBX10 wheels provide a muscular and aggressive stance.
Brushed tinted spokes perfectly complement the wagon's sharp, modern geometric lines and wide arches. This refined masterpiece proves that subtle upgrades define the ultimate street weapon.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on BC Forged LE10 Wheels
This Grey Audi RS6 C8 is running 22×11.5-inch BC Forged LE10 wheels finished in Matte Black. Paired with 335/25/22 tires.
Wheel Specs
- Brand: BC Forged
- Model: LE10
- Size: 22×11.5
- Finish: Matte Black
- Tires: 335/25/22
Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.
Matte black BC Forged LE10 wheels bite into the Nardo grey flanks with predatory intent. Their massive twenty-two-inch proportions fill the flared arches like molten industrial steel.
Massive 335-width rubber anchors this wide-body wagon to the cold, unforgiving asphalt surface. This Audi transcends simple transport, becoming a brutish masterpiece of dark, calculated velocity.
View gallery and fitment of this Audi RS6 →
Audi RS6 on Forgeline GTD1 5-Lug Wheels
This Blue Audi RS6 is running 22×11-inch Forgeline GTD1 5-Lug wheels finished in Brushed.
Ditch the minivan. Super car driving dynamics combined with SUV practicality make this wagon the perfect family hauler. Martin’s 2021 Audi RS6 Avant is tuned by Nemesis Autosport. It’s lowered via the Cete Automotive tuner with the factory air suspension and rides on 295/30ZR22 Michelin Pilot Super Sport tires and 22×11 Forgeline one piece forged monoblock GTD1 5-Lug wheels in a Brushed finish with a Tinted Clear Coat! See more at: https://forgeline.com/customer-gallery/martin
Wheel Specs
- Brand: Forgeline
- Model: GTD1 5-Lug
- Size: 22×11
- Finish: Brushed
Forgeline one-piece forged monoblock wheels are hand-crafted in Ohio. Pricing typically starts around $2,500 per set depending on size.
The Navarra Blue paint catches light like deep, glacial water against jagged mountain peaks. Brushed Forgeline GTD1 wheels fill the arches with aggressive, industrial precision.
These massive twenty-two inch alloys transform the wagon into a menacing, grounded predator. This Audi balances brutal executive performance with the sharp edge of bespoke craftsmanship.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on Forgeline GTD1 5-Lug Wheels
This Blue Audi RS6 C8 is running 22×11-inch Forgeline GTD1 5-Lug wheels finished in Brushed Tinted Clear. Paired with 295/30/22 tires. Suspension is CETE lowering module.
Wheel Specs
- Brand: Forgeline
- Model: GTD1 5-Lug
- Size: 22×11
- Finish: Brushed Tinted Clear
- Tires: 295/30/22
- Suspension: CETE lowering module
Forgeline one-piece forged monoblock wheels are hand-crafted in Ohio. Pricing typically starts around $2,500 per set depending on size.
The Audi RS6 C8 drips with menace in its signature blue paint. Brushed Forgeline GTD1 wheels fill the arches with aggressive, industrial precision.
A CETE module drops the chassis until the stance looks perfectly calculated. Massive tires provide the footprint required for this elegant, high-speed powerhouse.
This build represents the ultimate fusion of modern engineering and bespoke street style. It remains a titan of the tarmac that demands total visual respect.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on 1221 Wheels 0441 AP2 Apex3.0 Wheels
This Black Audi RS6 C8 is running 22×10.5-inch 1221 Wheels 0441 AP2 Apex3.0 wheels finished in Brushed Matte Bronze. Paired with 285/30/22 tires. Suspension is CETE lowering module.
Wheel Specs
- Brand: 1221 Wheels
- Model: 0441 AP2 Apex3.0
- Size: 22×10.5
- Finish: Brushed Matte Bronze
- Tires: 285/30/22
- Suspension: CETE lowering module
Estimated price range for 1221 Wheels: $12,000 and up.
The 1221 Apex3.0 spoke geometry complements the aggressive lines of the Audi RS6 C8. These wheels provide ample clearance for the massive factory carbon ceramic brake system.
The 22-inch diameter fills the flared arches perfectly while the matte bronze adds contrast. Precise offset choices create a flush, performance-oriented stance that maintains factory handling dynamics.
A CETE lowering module drops the chassis to close the remaining wheel arch gap. This complete setup balances high-end aesthetics with the functional requirements of a daily supercar.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on Vossen HF-5 Wheels
This Black Audi RS6 C8 is running 22-inch Vossen HF-5 wheels finished in Gloss Black. Paired with 285/30/22 tires.
Wheel Specs
- Brand: Vossen
- Model: HF-5
- Size: 22
- Finish: Gloss Black
- Tires: 285/30/22
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Audi RS6 C8 looms like a predatory shadow cloaked in obsidian armor. Vossen HF-5 wheels in gloss black perfectly complement this menacing, low-slung German aesthetic.
Massive 22-inch rims wrapped in 285/30 tires command total authority on the asphalt. This wagon is not merely a vehicle; it is a brutalist masterpiece of modern engineering.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on BC Forged HCA191S Wheels
This Grey Audi RS6 C8 is running 21×11.5-inch BC Forged HCA191S wheels finished in Matte Bronze / Brushed Bronze Lip. Paired with 325/30/21 tires.
Wheel Specs
- Brand: BC Forged
- Model: HCA191S
- Size: 21×11.5
- Finish: Matte Bronze / Brushed Bronze Lip
- Tires: 325/30/21
Estimated price range for BC Forged wheels: $3,500 and up depending on size and finish.
The Audi RS6 C8 demands significant unsprung mass reduction to maintain its dynamic composure. These BC Forged HCA191S wheels provide an essential reduction in rotational inertia for this platform.
Achieving this aggressive 21x11.5 fitment requires precise attention to fender clearance and offsets. Owners must utilize 325/30/21 rubber to ensure adequate sidewall protection and optimal contact patches.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on PUR RS50 Wheels
This Black Audi RS6 C8 is running 22-inch PUR RS50 wheels.
Wheel Specs
- Brand: PUR
- Model: RS50
- Size: 22
Obsidian paint swallows the evening light across the Audi RS6’s brutal, wide-body silhouette. Massive twenty-two-inch PUR RS50 wheels fill the arches with menacing, machined precision.
This machine commands the asphalt with a cold, calculated sense of dark authority. It remains a ruthless apex predator dressed in an impeccably tailored black suit.
View gallery and fitment of this Audi RS6 →
Audi RS6 C7 on Ferrada FR4 Wheels
This White Audi RS6 C7 is running 22-inch Ferrada FR4 wheels finished in Machined. Suspension is KW HAS.
15mm spacers F&R
Wheel Specs
- Brand: Ferrada
- Model: FR4
- Size: 22
- Finish: Machined
- Suspension: KW HAS
Estimated price range for Ferrada wheels: $2,000 to $3,000.
The Audi RS6 C7 demands attention in stark, clinical white paint. Huge Ferrada FR4 wheels dominate the profile with machined precision.
These twenty-two inch alloys provide a brutal, sophisticated contrast against the wagon. This build perfectly balances boardroom luxury with pure, unadulterated street aggression.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on Vossen HF-7 Wheels
This White Audi RS6 C8 is running 23×11-inch Vossen HF-7 wheels finished in Gloss Black.
Wheel Specs
- Brand: Vossen
- Model: HF-7
- Size: 23×11
- Finish: Gloss Black
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen HF-7 features aggressive spoke geometry that complements the Audi RS6 C8 bodywork perfectly. Its open design ensures excellent brake clearance for the massive factory calipers while maintaining structural integrity.
These 23-inch wheels provide a commanding stance that fills the large fenders with precision. This setup balances bold aesthetics with functional performance for a truly refined driving experience.
View gallery and fitment of this Audi RS6 →
Audi RS6 C8 on Vossen HF-5 Wheels
This Grey Audi RS6 C8 is running 22-inch Vossen HF-5 wheels finished in Triple Bronze (Prismatic Powders). Suspension is Lowering module.
Wheel Specs
- Brand: Vossen
- Model: HF-5
- Size: 22
- Finish: Triple Bronze (Prismatic Powders)
- Suspension: Lowering module
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Audi RS6 C8 adopts a menacing stance in Nardo Grey. Vossen HF-5 wheels finished in Triple Bronze provide striking contrast.
These twenty-two inch alloys demand immediate attention against the lowered chassis. This machine represents the pinnacle of subtle, aggressive German automotive engineering excellence.
View gallery and fitment of this Audi RS6 →