About This INFINITI Q60 Luxe 2018 Build
We love featuring real builds from real owners. This INFINITI Q60 Luxe 2018 sits on a set of 19×9.5 / 19×9.5-inch Ferrada CM2 wheels, and the result speaks for itself.
The owner chose Ferrada for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of INFINITI Q60 Luxe builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Ferrada CM2 creates a look that balances aggression with elegance.
Fitment Breakdown: Ferrada CM2 on the INFINITI Q60 Luxe 2018
I walked up to this Q60 and immediately noticed the stance. Running 19x9.5 Ferrada CM2s on all four corners creates a balanced look. The +40 offset sits perfectly flush with the fender lines.
We see a lot of aggressive builds, but this one hits the mark for a daily driver. The 19-inch diameter maintains a refined profile without looking like a carriage wheel. You get enough sidewall to keep the ride quality bearable on city streets.
Clearance is always the big question with these Infiniti calipers. The CM2 spoke design offers plenty of room for the factory brakes. I checked the gap between the spokes and the caliper, and there is zero risk of contact.
The hub bore fits the Q60 perfectly without needing any sketchy adapter rings. A clean, direct fit gives me peace of mind when we take these cars out for a canyon run. It feels solid and planted at highway speeds.
Lowering springs tighten up that factory gap significantly. The car drops just enough to make the wheel arch look full. You get a much more aggressive profile without destroying your alignment specs.
Watch for rubbing on the inner fender liners if you hit a massive dip. We saw no evidence of contact during our test drive. The 9.5-inch width is really the sweet spot for this specific chassis.
The barrel lip depth on the CM2 adds a layer of depth that flat-faced wheels lack. It gives the Q60 a muscular, purposeful aesthetic. This setup proves you do not need extreme camber to look good.
What We Recommend for INFINITI Q60 Luxe 2018 Owners
If you want to replicate this look, stick to the 19-inch platform. Moving up to 20s often ruins the ride quality on these luxury coupes. Keep your width between 9.5 and 10.5 inches for the best results.
Offsets are where most owners ruin their build. Aim for +35 to +40 to keep the wheels from poking out like a cartoon character. A flush fitment is always the goal for a clean, professional finish.
We prefer a square setup like this one for tire rotation. You get much better life out of your rubber when you can swap them around. It also makes the car feel more predictable in hard cornering.
Do not go overboard with tire stretch unless you are chasing a very specific look. A slight stretch looks cool, but it leaves your rims vulnerable to curb rash. Pick a tire width that protects the rim lip properly.
Avoid cheap spacers at all costs. If you need more poke, buy a wheel with a lower offset from the start. Trust me, your wheel bearings will thank you for keeping the scrub radius correct.
Style and Build Analysis
The Gray finish on these CM2s creates a sinister contrast against the factory paint. It is not quite black, but it has that dark, metallic sheen that pops under direct sunlight. It feels premium and aggressive at the same time.
The split-spoke design of the Ferrada CM2 brings a technical look to the Q60. It highlights the complex curves Infiniti built into the body panels. The wheels look like they belong in a high-end design studio.
This car holds its own against any build we have featured lately. It avoids the tacky, oversized aesthetic that ruins so many modern coupes. Everything looks cohesive and intentionally placed.
The proportions are spot-on from every angle. When the car is parked, the tires sit right where they should relative to the wheel wells. It commands attention without screaming for it.
We see hundreds of builds, but this one remains a personal favorite. The combination of the Gray wheel and the lowered stance creates a timeless vibe. It makes the Q60 look like a concept car that actually hit the streets.
Why We Love This Build
Seeing this Q60 roll down the street with these Gray CM2s is a real treat. The way the light dances off the spokes makes the whole car look faster, even standing still. Those wheels fill the arches perfectly, giving the car a hunkered-down, predatory stance that demands a second look. It captures the essence of a true enthusiast build.
Everything about this setup feels refined and calculated for maximum impact. We love how it blends luxury with an edge that most stock Q60s lack. It is the kind of car that makes you look back every time you walk away. Grab a set and transform your ride today.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: INFINITI Q60 Luxe 2018
- Vehicle Color:
- Wheel Brand & Model: Ferrada CM2
- Wheel Size: 19×9.5 / 19×9.5
- Offset: 40 / 40
- Wheel Finish: Gray
- Tires: Pirelli PZERO 255/30 25″x10″ / 255/30 25″x10″
- Suspension: Lowering Springs
Before You Buy: Fitment Checklist
We talk to INFINITI Q60 Luxe owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 19×9.5 / 19×9.5-inch wheels fit my INFINITI Q60 Luxe? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of INFINITI Q60 Luxe owners run 19×9.5 / 19×9.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
