About This Audi RS3 Base 2019 Build
We love featuring real builds from real owners. This Audi RS3 Base 2019 sits on a set of 20×8.5 / 20×8.5-inch Vossen CVT wheels, and the result speaks for itself.
The owner chose Vossen for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Audi RS3 Base builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Vossen CVT creates a look that balances aggression with elegance.
Fitment Breakdown: Vossen CVT on the Audi RS3 Base 2019
I walked around this RS3 at the show, and the fitment on these 20x8.5 Vossen CVTs really caught my eye. Running a square setup with a +40 offset keeps things simple yet aggressive for the MQB platform. It hits the sweet spot between performance and aesthetics.
The 20-inch diameter fills the wheel wells perfectly without looking like a rubber band nightmare. By sticking to an 8.5-inch width, we avoid the dreaded poke that ruins the clean lines of the RS3. Everything sits flush with the fenders, right where it belongs.
Clearing those massive Audi front calipers is always the biggest headache on this chassis. These Vossen wheels clear the rotors with room to spare, thanks to the smart spoke design. You won't need bulky spacers to force these to work.
The hub bore on these wheels matches the Audi spec perfectly, so there is zero vibration at highway speeds. I love when a build doesn't rely on cheap hub rings. It shows the owner cares about the mechanical longevity of the car.
Air suspension completely changes the game for this specific setup. When the car drops, the wheels tuck right up inside the fenders without shredding the tire sidewalls. You get that slammed look without sacrificing the ability to drive over a speed bump.
I did notice a tiny bit of potential rubbing on the inner fender liner during full lock. If you decide to go this route, make sure you trim the liners early. It saves you a massive headache down the road.
The barrel lip depth on the CVT is subtle but adds a nice sense of dimension. It draws your eyes inward toward the center cap. It is a classy touch that makes the wheel look more expensive than it is.
What We Recommend for Audi RS3 Base 2019 Owners
If you want to replicate this, stay within the 19 to 20-inch range for the best results. Anything larger kills the ride quality, and anything smaller looks lost under the flared arches. Keep the width around 8.5 or 9 inches to maintain that daily-driver utility.
Offset is your best friend when dialing in a stance. We find that +40 to +45 provides the cleanest look without needing heavy fender rolling. You want the tire to sit just inside the lip, not grinding against it.
Do not even think about a staggered setup on this Quattro system. Keep all four wheels the same size to prevent tearing up your differential. Trust me, the mechanical stress isn't worth the ego boost of a wider rear wheel.
Pick a performance tire with a slight shoulder roundness to help with clearance. A square-shouldered tire will catch the fender edge every single time you hit a bump. Tire choice matters just as much as wheel choice here.
Avoid cheap spacers if you can help it. They introduce rotational mass and stress on your wheel bearings that lead to premature failure. Get the offset right from the factory, and you will save yourself a lot of shop time.
Style and Build Analysis
This custom finish on the Vossen CVTs is a total showstopper. It catches the sun in a way that standard silver or black finishes just can't match. It pulls the whole car together and makes the Audi paint pop.
The directional spoke design of the CVT gives the car a sense of speed, even when it is parked. It makes the RS3 look like it is ready to pounce on the asphalt. It is aggressive, but it stays sophisticated.
Most builds I see are just cookie-cutter setups, but this one has personality. The contrast between the custom wheel color and the factory body lines is spot on. It proves that a little imagination goes a long way.
The stance is perfectly calculated for the body style. By using air, the owner has removed the ugly gap that plagues most stock RS3s. It sits flat on the ground, demanding attention from every angle.
Compared to other builds we have featured, this one is much more cohesive. It avoids the neon gimmicks and sticks to high-quality hardware and a killer color palette. It is a masterclass in modern street style.
Why We Love This Build
I love this build because it captures the soul of the RS3. When the air bags dump, the car drops into a menacing stance that turns every head on the street. The custom Vossen finish glows under the parking lot lights, highlighting every curve of the bodywork. It is a perfect blend of German engineering and custom flair.
Seeing this car in person reminds me why we do this. It is clean, it is functional, and it represents the owner's vision without compromise. This is exactly how an RS3 should sit. Do your build right the first time and just drive it.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Audi RS3 Base 2019
- Vehicle Color:
- Wheel Brand & Model: Vossen CVT
- Wheel Size: 20×8.5 / 20×8.5
- Offset: 40 / 40
- Wheel Finish: Custom
- Tires: Falken Azenis FK510 235/30 25.6″x9.3″ / 235/30 25.6″x9.3″
- Suspension: Air Suspension
Before You Buy: Fitment Checklist
We talk to Audi RS3 Base owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×8.5 / 20×8.5-inch wheels fit my Audi RS3 Base? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Audi RS3 Base owners run 20×8.5 / 20×8.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
