About This Audi RS5 B9 Build
We love featuring real builds from real owners. This Blue Audi RS5 B9 sits on a set of 20×10.5-inch Vossen ML-R3 wheels, and the result speaks for itself.
The owner chose Vossen for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Audi RS5 builds come through WheelFront every month, but this one stands out. The combination of the Blue exterior with the Vossen ML-R3 creates a look that balances aggression with elegance.
Fitment Breakdown: Vossen ML-R3 on the Audi RS5 B9
I walked around this B9 RS5 at the meet, and the stance immediately grabbed me. We are looking at a 20x10.5 setup that fills these aggressive Audi arches perfectly. That extra width pushes the wheel right to the edge of the fender line.
The Vossen ML-R3 uses a clever offset to clear those massive front calipers. We usually worry about spoke clearance on these performance brakes, but the ML-R3 design hugs the hub without any drama. It clears the factory hardware with just enough room to breathe.
I measured the fender gap, and the fitment sits flush without needing a poke. The 275/30/20 tire choice creates a slight, clean stretch that keeps the sidewall from bulging. It keeps the rubber away from the fender liners during hard cornering.
That 10.5-inch width forces the wheel to sit deep in the barrel. The concave profile of the ML-R3 adds a ton of visual weight to the rear of the car. It makes the B9 look much wider than the factory setup ever could.
We checked the hub bore fitment to ensure a vibration-free ride. Vossen machines these to specific Audi specs, so the hub-centric fit is spot on. You get a solid connection that handles high-speed highway pulls with zero steering wheel shimmy.
Watch out for the inner fender plastic if you drop the car too low. Since we are running a 10.5-inch width, a heavy drop might require a slight roll or a heat gun adjustment. Keep your ride height sane to maintain that perfect geometry.
The spoke design carries the eye all the way to the outer edge of the rim. This makes the wheel look bigger than a standard 20-inch setup. It commands attention and highlights the technical nature of the Audi chassis.
What We Recommend for Audi RS5 B9 Owners
If you want this look, stick to the 20-inch diameter. Going up to 21 inches often ruins the ride quality on these platforms. 20s provide the best balance of aesthetics and performance for your daily driver.
For the width, 10 inches is safe, but 10.5 inches is the sweet spot for the aggressive stance. Aim for an offset between ET25 and ET30 to keep the wheel tucked properly. Anything lower will likely poke too far and kill your paint with rock chips.
I always suggest a square setup for these cars. Running the same size on all four corners makes tire rotations easier and keeps the Quattro system happy. Staggered setups look cool, but they often mess with the diffs on these Audis.
Don't skimp on your tire selection. A 275/30/20 is a proven size, but look for a tire with a stiff sidewall. It prevents that sloppy feeling when you push the car hard into a tight turn.
Avoid cheap hub-centric rings if you can. Always order wheels bored specifically for the Audi 66.6mm hub to save yourself a headache. Proper hardware ensures your investment stays on the car where it belongs.
Style and Build Analysis
The Gloss Black finish against the Blue paint is an absolute classic move. It creates a high-contrast look that makes the car look darker and meaner. The deep blue body pops against the void of the black wheels.
Vossen nailed the design language with these ML-R3s. The multi-spoke pattern looks complex but clean, mimicking the intricate engineering of the RS5 itself. It feels like a factory upgrade that Audi should have offered from the showroom.
Proportionally, this build is perfect. The wheels don't overwhelm the body lines; they accentuate the wide-body arches. Every time the light hits the Gloss Black, the wheels show off their sharp edges and deep concave centers.
We see a lot of wheels that look too busy or too simple. The ML-R3 sits right in the middle, offering just enough flair without looking like a tuner project gone wrong. It bridges the gap between luxury grand tourer and aggressive track weapon.
The stance makes the car look planted even when it sits parked. It creates a presence that turns heads at every stoplight. You can tell the owner cared about the details because the fitment is dead nuts on the money.
Why We Love This Build
This RS5 is the perfect example of how a few key mods can totally change a car. When the sun hits that Blue paint, the Gloss Black wheels look like liquid shadows pulling the car toward the pavement. It is purposeful, sleek, and refined.
We love this build because it keeps the Audi soul while adding a sharp, modern edge. The fitment is tight enough to look custom but reliable enough to drive hard every single day. It reminds us why we fell in love with car culture in the first place.
Every time I look at this thing, I want to grab the keys and go for a long canyon drive. This is exactly how you dial in an RS5 to make it your own. Go get the wheels and finish the look.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Audi RS5 B9
- Vehicle Color: Blue
- Wheel Brand & Model: Vossen ML-R3
- Wheel Size: 20×10.5
- Offset: Contact dealer
- Wheel Finish: Gloss Black
- Tires: 275/30/20
Before You Buy: Fitment Checklist
We talk to Audi RS5 owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×10.5-inch wheels fit my Audi RS5? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Audi RS5 owners run 20×10.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
