FIND WHEELS FOR YOUR CAR
SEARCH RESULTS
Ford Mustang S550 on Vossen HF-5 Wheels



This Red Ford Mustang S550 is running 20×9.5 and 20×11-inch Vossen HF-5 wheels finished in Matte Gunmetal. Paired with 255/35-20 || 295/30-20 tires.
Wheel Specs
- Brand: Vossen
- Model: HF-5
- Size: 20×9.5 and 20×11
- Finish: Matte Gunmetal
- Tires: 255/35-20 || 295/30-20
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen HF-5 choice signals a shift toward modern, street-focused aesthetic refinement. This setup prioritizes clean, aggressive geometry over raw track performance metrics.
The matte gunmetal finish provides a sophisticated contrast against the vibrant red paint. These staggered dimensions perfectly balance the S550's muscular profile with contemporary elegance.
View gallery and fitment of this Ford Mustang →
Porsche 911 Carrera 991 on Vossen HF-5 Wheels


This Blue Porsche 911 Carrera 991 is running 20×8.5 and 20×11-inch Vossen HF-5 wheels.
Wheel Specs
- Brand: Vossen
- Model: HF-5
- Size: 20×8.5 and 20×11
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Porsche 911 Carrera 991 wears its blue paint with quiet, effortless authority. Vossen HF-5 wheels expand the stance, filling the arches with geometric precision.
These twenty-inch alloys refine the German silhouette into a study of modern performance. This build captures the essence of restrained power through thoughtful, deliberate mechanical curation.
View gallery and fitment of this Porsche 911 Carrera →
Lamborghini Urus on Vossen M-X6 Wheels



This Black Lamborghini Urus is running 23×10-inch Vossen M-X6 wheels finished in Gloss Black.
Wheel Specs
- Brand: Vossen
- Model: M-X6
- Size: 23×10
- Finish: Gloss Black
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen M-X6 wheels provide necessary structural rigidity for the Urus platform. These twenty-three inch rims optimize track width while maintaining precise steering geometry.
Owners must prioritize high-load rated tires to accommodate the vehicle's immense curb weight. Proper fitment requires professional calibration to preserve the advanced active suspension dynamics.
View gallery and fitment of this Lamborghini Urus →
Audi A4 B9 on Vossen HF-2 Wheels



This Blue Audi A4 B9 is running 19-inch Vossen HF-2 wheels finished in Satin Bronze. Paired with 245/35/19 tires.
Wheel Specs
- Brand: Vossen
- Model: HF-2
- Size: 19
- Finish: Satin Bronze
- Tires: 245/35/19
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen HF-2 wheel choice elevates the Audi B9 beyond its conservative corporate roots. This selection signals a sophisticated shift toward modern, performance-oriented street aesthetics.
Satin bronze spokes against the blue bodywork create a strikingly refined visual contrast. This build achieves a perfect balance between executive poise and aggressive aftermarket styling.
View gallery and fitment of this Audi A4 →
Kia Stinger on Vossen VFS-6 Wheels



This Red Kia Stinger is running 20×9 and 20×10.5-inch Vossen VFS-6 wheels finished in Satin Bronze. Paired with 245/30/20 || 285/35/20 tires.
Wheel Specs
- Brand: Vossen
- Model: VFS-6
- Size: 20×9 and 20×10.5
- Finish: Satin Bronze
- Tires: 245/30/20 || 285/35/20
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen VFS-6 spoke geometry complements the Kia Stinger’s aggressive, muscular body lines perfectly. These wheels offer excellent brake clearance while ensuring optimal proportion for the large wheel arches.
The satin bronze finish creates a sophisticated contrast against the vibrant red exterior paint. This staggered setup delivers superior rear traction while achieving a wide, flush, performance-oriented stance.
View gallery and fitment of this Kia Stinger →
Audi Q7/SQ7 on Vossen LC2-C1 Wheels




This Black Audi Q7/SQ7 is running 23×11-inch Vossen LC2-C1 wheels.
Wheel Specs
- Brand: Vossen
- Model: LC2-C1
- Size: 23×11
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
Deep obsidian paint swallows the light, masking the Audi’s massive frame in shadows. Beneath the arches, forged Vossen wheels stretch to twenty-three inches of aggressive geometry.
These machined blades slice through the tarmac with relentless, heavy-set precision. This obsidian beast demands total submission from every road it encounters.
View gallery and fitment of this Audi Q7/SQ7 →
Chevrolet Corvette C8 Stingray on Vossen M-X6 Wheels




This White Chevrolet Corvette C8 Stingray is running 20×9 and 21×12-inch Vossen M-X6 wheels finished in Gloss Black. Paired with 255/30/20 and 325/25/21 tires.
Wheel Specs
- Brand: Vossen
- Model: M-X6
- Size: 20×9 and 21×12
- Finish: Gloss Black
- Tires: 255/30/20 and 325/25/21
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
Read our full C8 Corvette aftermarket wheel guide for fitment advice and top picks.
The Vossen M-X6 wheels significantly sharpen the Corvette Stingray’s mid-engine handling dynamics. These forged alloys reduce unsprung mass while enhancing structural rigidity for high-speed cornering.
Owners must select tires carefully to maintain the factory’s sensitive electronic stability control calibrations. Proper offset alignment remains crucial to prevent fender rubbing with this aggressive 21-inch rear setup.
View gallery and fitment of this Chevrolet Corvette →
Audi RS4 B9 on Vossen HF-5 Wheels


This Grey Audi RS4 B9 is running 20×9-inch Vossen HF-5 wheels finished in Gloss Black. Paired with 275/30/20 tires.
Wheel Specs
- Brand: Vossen
- Model: HF-5
- Size: 20×9
- Finish: Gloss Black
- Tires: 275/30/20
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Nardo Grey Audi RS4 commands attention through understated, brutalist aesthetic precision. Vossen HF-5 wheels in gloss black provide a sharp, monochromatic contrast.
These twenty-inch alloys define the wagon with athletic, aggressive stance and purpose. This build represents the perfect marriage of factory performance and aftermarket refinement.
View gallery and fitment of this Audi RS4 →
Tesla Model S on Vossen VFS-1 Wheels


This White Tesla Model S is running 21×9 and 21×10.5-inch Vossen VFS-1 wheels. Paired with 245/35/21 || 285/30/21 tires.
Wheel Specs
- Brand: Vossen
- Model: VFS-1
- Size: 21×9 and 21×10.5
- Tires: 245/35/21 || 285/30/21
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen VFS-1 spoke geometry complements the Model S’s sleek, aerodynamic body perfectly. These wheels offer excellent brake clearance while maintaining ideal visual proportions for larger chassis.
This aggressive staggered setup ensures superior traction and a commanding, flush stance. It achieves a balanced aesthetic upgrade without sacrificing essential handling or ride quality.
View gallery and fitment of this Tesla Model S →
Tesla Model 3 on Vossen HF-3 Wheels




This Black Tesla Model 3 is running 20×9 and 20×10.5-inch Vossen HF-3 wheels finished in Tinted Gloss Black. Paired with 255/35-20 || 295/30-20 tires.
Wheel Specs
- Brand: Vossen
- Model: HF-3
- Size: 20×9 and 20×10.5
- Finish: Tinted Gloss Black
- Tires: 255/35-20 || 295/30-20
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Tesla Model 3 wears deep black paint with absolute, haunting precision. Vossen HF-3 wheels amplify this aggressive aesthetic through sheer geometric complexity.
Staggered fitment demands immediate respect from every onlooker on the road. This build represents the definitive evolution of modern electric automotive performance art.
View gallery and fitment of this Tesla Model 3 →
Chevrolet Camaro SS 6th Gen on Vossen HF-3 Wheels



This Grey Chevrolet Camaro SS 6th Gen is running 20×9 and 20×10.5-inch Vossen HF-3 wheels finished in Double Tinted Gloss Black.
Wheel Specs
- Brand: Vossen
- Model: HF-3
- Size: 20×9 and 20×10.5
- Finish: Double Tinted Gloss Black
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Vossen HF-3 wheels enhance the Camaro SS platform with impressive structural refinement. Their aggressive spoke geometry perfectly complements the muscular, angular aesthetics of this sixth-generation chassis.
Owners must specify the 20x9 front and 20x10.5 rear offsets for ideal fender clearance. This double tinted gloss black finish demands meticulous maintenance to preserve its deep, lustrous visual impact.
View gallery and fitment of this Chevrolet Camaro →
Tesla Model 3 on Vossen HF-4T Wheels




This White Tesla Model 3 is running 20×9.5 and 20×11-inch Vossen HF-4T wheels finished in Tinted Gloss Black. Paired with 245/35/20 || 285/30/20 tires.
Wheel Specs
- Brand: Vossen
- Model: HF-4T
- Size: 20×9.5 and 20×11
- Finish: Tinted Gloss Black
- Tires: 245/35/20 || 285/30/20
Vossen offers both flow-formed and fully forged options. Pricing ranges from around $1,800 for flow-formed to $4,000 and up for forged series.
The Tesla Model 3 undergoes a striking transformation through these Vossen HF-4T wheels. Tinted Gloss Black spokes contrast sharply against the pristine white bodywork.
Staggered fitment provides a wide, aggressive stance that commands the road. This build represents the perfect marriage of electric efficiency and modern automotive style.
View gallery and fitment of this Tesla Model 3 →
- «Previous Page
- 1
- …
- 94
- 95
- 96
- 97
- 98
- …
- 175
- Next Page»