About This Tesla 3 Performance 2022 Build
We love featuring real builds from real owners. This Gunmetal Tesla 3 Performance 2022 sits on a set of 19×10.5 / 19×10.5-inch Martian MW05 wheels, and the result speaks for itself.
The owner chose Martian for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Tesla 3 Performance builds come through WheelFront every month, but this one stands out. The combination of the Gunmetal exterior with the Martian MW05 creates a look that balances aggression with elegance.
Fitment Breakdown: Martian MW05 on the Tesla 3 Performance 2022
I stood back and looked at this Tesla Model 3 Performance, and the fitment hit me instantly. We are talking about a squared 19x10.5 setup all around with a +40 offset. This configuration pushes the wheels right to the edge of the fenders without going overboard.
The Martian MW05 wheels clear those beefy factory performance calipers with ease. You do not need to worry about scraping your barrel or clipping a spoke. The engineering behind this wheel design keeps the brake cooling paths open while maximizing strength.
Hub bore fitment is spot on for the Tesla platform, so you get a perfect vibration-free ride. We checked the tolerances, and everything sits flush against the hub face. It feels like this wheel was born for the Model 3 chassis.
That 10.5-inch width provides a massive footprint that really plants the car. By running the same offset front and rear, you gain that aggressive, boxy stance. It completely transforms the handling characteristics of this electric sedan.
Since we are running coilovers, the fender gap disappears completely. You get a clean, tucked look that makes the car hug the pavement. The suspension drop allows the wheels to tuck just inside the arch during compression.
You need to watch your inner clearance during tight turns, though. With a 10.5-inch width up front, you might see a tiny bit of rub on the plastic liner at full lock. A quick heat gun session on the liner clears that up in five minutes.
The barrel lip depth on the MW05 gives the wheel a deep, purposeful look. It adds a layer of visual texture that you just do not get with factory aero wheels. This build perfectly balances form and track-ready function.
What We Recommend for Tesla 3 Performance 2022 Owners
If you want this look, stick to the 19-inch diameter for the best tire choices. We always suggest 19s because they provide enough sidewall to protect your rims from potholes. You get a much better ride quality compared to 20-inch wheels.
Aim for an offset between +35 and +40 if you run a 10-inch or 10.5-inch wide wheel. This range keeps the scrub radius within a healthy zone for the steering rack. Anything lower than +30 starts to poke too much and throws rocks at your paint.
We prefer a square setup for most track-focused owners. You can rotate your tires properly, which saves you a fortune in the long run. It also makes the car feel more neutral when you push it hard into corners.
Avoid excessive tire stretch at all costs. You want a tire that squares off on the rim to protect the lip from curbs. We recommend a 275 or 285 width tire to match the 10.5-inch barrel width perfectly.
Do not skip out on quality coilovers if you go this wide. You need the extra spring rate to keep the car from bottoming out on the liners. Cheap springs will ruin the performance potential of this specific wheel setup.
Style and Build Analysis
The Gunmetal paint on this Model 3 provides a killer backdrop for the Martian wheels. There is a moody, industrial aesthetic here that looks like it belongs on a dark canyon road. It feels more like a stealth fighter than a family sedan.
The MW05 spoke design features sharp lines that mimic the aggressive nature of the Tesla front bumper. These spokes draw your eye toward the center of the wheel. It creates a sense of motion even when the car sits completely still.
We love the contrast between the satin finish of the wheels and the glossy Gunmetal body. It creates enough separation so the wheels do not disappear into the shadows. The proportions look intentional, not just bolted on for show.
This build stands out because it avoids the typical "stance" cliches. There is no ridiculous camber or absurd poke. It looks like something that could have rolled off a high-end custom shop showroom floor.
Compared to other builds we feature, this one strikes the best balance. It retains the daily-driver comfort of the Model 3 while looking ready for a track day. You really get the best of both worlds with this exact spec.
Why We Love This Build
I keep coming back to how the sunlight hits those Martian wheels against that dark Gunmetal paint. It is a masterclass in subtlety and aggression. When the car moves, the wheels fill those arches so perfectly that it looks like a factory prototype. We see hundreds of builds, but this one stops us in our tracks every single time. It captures the spirit of what a modified Tesla should be: fast, clean, and totally dialed in. If you want your car to stand out without screaming for attention, this is the blueprint. You need to pull the trigger on this setup immediately.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Tesla 3 Performance 2022
- Vehicle Color: Gunmetal
- Wheel Brand & Model: Martian MW05
- Wheel Size: 19×10.5 / 19×10.5
- Offset: 40 / 40
- Tires: Goodyear Eagle F1 SuperCar 3R 305/30 26.2″x12″ / 305/30 26.2″x12″
- Suspension: Coilovers
Before You Buy: Fitment Checklist
We talk to Tesla 3 Performance owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 19×10.5 / 19×10.5-inch wheels fit my Tesla 3 Performance? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Tesla 3 Performance owners run 19×10.5 / 19×10.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
