About This INFINITI Q60 Sport 2014 Build
We love featuring real builds from real owners. This INFINITI Q60 Sport 2014 sits on a set of 19×9.5 / 19×11-inch Aodhan DS07 wheels, and the result speaks for itself.
The owner chose Aodhan for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of INFINITI Q60 Sport builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Aodhan DS07 creates a look that balances aggression with elegance.

Fitment Breakdown: Aodhan DS07 on the INFINITI Q60 Sport 2014
I stood right next to this Q60 when it rolled into the lot, and the fitment is absolute perfection. We see a lot of these cars running soft specs, but these Aodhan DS07s in 19x9.5 front and 19x11 rear change the entire game. The +22 offset up front pushes the wheels right to the edge of the fender liner without making it look like a cartoon.
The rear +15 offset on the 11-inch wide barrel creates a massive, aggressive dish that fills the wheel well beautifully. We checked the clearance, and you get just enough room to avoid clipping the quarter panels on big bumps. The hub bore matches up tight, so you get zero vibration at highway speeds.
Caliper clearance is always the nightmare with these Sport models because those factory brakes are chunky. These DS07s clear the calipers easily thanks to the smart spoke design that bows out just enough. You do not need to run spacers here, which keeps your scrub radius exactly where the engineers intended.
The lowering springs tighten up that factory wheel gap instantly. By dropping the center of gravity, the wheels tuck just a hair under the fender lip when the suspension compresses. It gives the car that planted, predatory look that the stock setup desperately misses.

We did notice the rear fenders are sitting very close to the tires, so you need to keep your alignment tight. If you run a tire with a square shoulder, you might catch the plastic liner on a hard corner. We recommend a slight stretch to keep things clear and prevent any unnecessary rubbing issues.
That 11-inch rear barrel is the real hero of this build. It creates a deep, concave profile that makes the car look twice as wide from the rear quarter view. It is a bold look that demands attention without screaming for it.
What We Recommend for INFINITI Q60 Sport 2014 Owners
If you want to replicate this, do not get lazy with your tire selection. We suggest a 245/35 up front and a 275/30 or 285/30 in the back to maintain a clean aesthetic. A little bit of stretch helps keep the fenders safe while giving you that pro-touring vibe.
Staggered setups are the only way to go on this chassis. You want that meaty footprint in the back to put the power down and balance out the visual weight of the car. Running a square setup on a Q60 just makes the car look awkward and unbalanced.

Many guys make the mistake of buying wheels with high offsets and then trying to fix it with cheap spacers. Do not do that, because it ruins your handling and puts unnecessary stress on your wheel bearings. Buy the right offset the first time so the wheel sits flush with the fender naturally.
You definitely need to consider your alignment specs if you go this low. We recommend pulling some negative camber in the rear to clear the fenders. It keeps the car drivable on local roads without destroying your tires in three thousand miles.
Finally, always roll your rear fenders if you plan on going this aggressive. Even if you think you have room, one nasty pothole can ruin a perfectly good paint job. It is a cheap insurance policy for your fenders and your expensive new wheels.
Style and Build Analysis
The Bronze finish against the Q60’s paint is a masterclass in color theory. It pops enough to catch your eye instantly, but it doesn't look cheap or gaudy. The metallic flakes in the finish catch the morning sun and make the wheels look like they are glowing.

The DS07 design features a classic mesh-style spoke pattern that nods to old-school JDM builds. It feels right at home on an Infiniti, bridging the gap between luxury and performance. The proportions are balanced perfectly, making the car look like a factory special edition.
Road presence is where this car really wins. When it sits parked, the stance looks aggressive and deliberate. Most builds we feature look like they are trying too hard, but this one looks like it was meant to be exactly this way from the factory.
We have seen plenty of Q60s on generic wheels that wash out the car’s lines. These Aodhans add a layer of complexity to the profile that draws your eye down the side of the body. You find yourself staring at the way the light hits the concave rear wheels for way too long.
It is all about the details, and this build nails every single one of them. The proportions are spot on, the finish is unique, and the fitment is tight. This is exactly how you modify a modern coupe without losing its sophisticated edge.
Why We Love This Build
I walked around this car three times because I could not get enough of the way it sits. The Bronze wheels give the Q60 a subtle, aggressive edge that makes it stand out in a sea of boring stock rides. Every time the sun hit the deep barrels, the car just came alive.
We see thousands of cars, but this one hits differently because it respects the lines of the Infiniti. It does not look like a half-baked project; it looks like a finished, high-end machine. The fitment is so flush it makes my heart race.
This build proves that you do not need a massive budget to create something truly special. You just need the right vision and a set of wheels that actually fit the car. This Q60 is a masterclass in execution. Go get your fitment sorted and drive it like you mean it.

Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: INFINITI Q60 Sport 2014
- Vehicle Color:
- Wheel Brand & Model: Aodhan DS07
- Wheel Size: 19×9.5 / 19×11
- Offset: 22 / 15
- Wheel Finish: Bronze
- Tires: Continental Extreme Contact Dws 245/45 27.7″x9.6″ / 275/35 26.6″x10.8″
- Suspension: Lowering Springs
Before You Buy: Fitment Checklist

We talk to INFINITI Q60 Sport owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 19×9.5 / 19×11-inch wheels fit my INFINITI Q60 Sport? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of INFINITI Q60 Sport owners run 19×9.5 / 19×11-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.



