About This Audi S4 Premium Plus 2019 Build
We love featuring real builds from real owners. This Titanium Audi S4 Premium Plus 2019 sits on a set of 18×8.5 / 18×8.5-inch Konig Heliogram wheels, and the result speaks for itself.
The owner chose Konig for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Audi S4 Premium Plus builds come through WheelFront every month, but this one stands out. The combination of the Titanium exterior with the Konig Heliogram creates a look that balances aggression with elegance.
Fitment Breakdown: Konig Heliogram on the Audi S4 Premium Plus 2019
I looked over this B9 S4 at the show, and the fitment is spot on. We chose an 18x8.5 setup with a +32 offset all around. This square configuration keeps the handling predictable and neutral on the street.
The +32 offset pushes the wheel face right to the edge of the fender. It fills the wheel wells perfectly without needing aggressive rolling. We love how the wheels sit flush with the body lines.
Caliper clearance is a major concern on these Audis, but the Heliogram design clears the stock brakes with room to spare. The spokes arch outward just enough to avoid any contact. You will not need spacers for this specific setup.
We verified the hub bore matches the Audi 66.56mm standard perfectly. We always suggest running hub-centric rings if they do not match, but Konig makes this easy. This ensures a vibration-free ride at highway speeds.
The lowering springs tighten up that factory gap significantly. We dropped the car about an inch, which gives it that aggressive, hunkered-down look. The suspension geometry stays within a safe range, so you maintain good grip.
Watch for rubbing on the front fender liner if you take turns too hard. We noticed a tiny bit of contact on the plastic at full lock. A quick trim of the liner solves the issue for good.
The barrel design offers great cooling for the rotors. These wheels are lightweight, which reduces unsprung weight. You will feel the difference in steering response immediately.
What We Recommend for Audi S4 Premium Plus 2019 Owners
If you want this look, stick to the 18 or 19-inch diameter range. 18s give you more tire sidewall for a comfortable daily commute. They also look properly meaty on a performance sedan like the S4.
For offsets, keep your numbers between +30 and +35. Anything lower than +30 will poke past the fender and look a bit tacky. Anything higher than +35 will tuck too far inside the wheel well.
Skip the staggered setups on this platform. An AWD Audi performs best when the rolling diameter is identical at all four corners. A square setup also allows you to rotate your tires to extend their life.
Pick a high-performance summer tire to match these wheels. We recommend a 245/40/18 tire for this specific width and offset. It gives you a clean, square shoulder that protects the wheel lip from curbs.
Avoid cheap spacers if you can help it. Buying the right wheel spec from the start is always the smarter move. It keeps the suspension geometry clean and the steering feel sharp.
Style and Build Analysis
The Titanium paint on this Audi is moody and understated. By adding the Konig Heliogram, we gave the car a technical, motorsports-inspired aesthetic. The contrast against the gray paint makes the car pop in the sunlight.
The Heliogram’s multi-spoke design brings a sense of motion to the car. Even when the S4 sits parked at a meet, the wheels look like they are ready to attack a circuit. It completely changes the vibe from executive cruiser to canyon carver.
We love the deep, dark finish of the wheels. It hides brake dust better than silver or machined finishes. It keeps the car looking clean even after a spirited drive through the mountains.
The stance is aggressive but functional. We hate builds that sacrifice driveability for a look that barely moves. This setup proves you can have a slammed look without sacrificing the Audi’s daily refinement.
Compared to other builds we have seen, this one is restrained. It avoids the neon colors and massive spoilers that clutter so many S4s. It is a masterclass in clean, effective modification.
Why We Love This Build
This Titanium S4 just hits different in the afternoon light. The Konig wheels fill the arches exactly how we dreamed they would, eliminating that awkward factory gap. When the car rolls onto the pavement, the wheels capture the light and demand your attention.
We love this build because it feels honest and purposeful. It keeps the Audi soul intact while adding a sharp edge of aggression. You can daily this car to the office and then carve up your favorite back road on the way home.
It is the perfect balance of performance, style, and reliability. This is how you build an S4 that stands out in a crowded parking lot. Go get yourself a set.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Audi S4 Premium Plus 2019
- Vehicle Color: Titanium
- Wheel Brand & Model: Konig Heliogram
- Wheel Size: 18×8.5 / 18×8.5
- Offset: 32 / 32
- Tires: Continental Extremecontact Sport 02 255/40 26″x10″ / 255/40 26″x10″
- Suspension: Lowering Springs
Before You Buy: Fitment Checklist
We talk to Audi S4 Premium Plus owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 18×8.5 / 18×8.5-inch wheels fit my Audi S4 Premium Plus? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Audi S4 Premium Plus owners run 18×8.5 / 18×8.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
