About This Audi RS3 Base 2017 Build
We love featuring real builds from real owners. This Audi RS3 Base 2017 sits on a set of 20×8.5 / 20×8.5-inch OZ Racing Superturismo Lm wheels, and the result speaks for itself.
The owner chose OZ Racing for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Audi RS3 Base builds come through WheelFront every month, but this one stands out. The combination of the exterior with the OZ Racing Superturismo Lm creates a look that balances aggression with elegance.
Fitment Breakdown: OZ Racing Superturismo Lm on the Audi RS3 Base 2017
I walked up to this RS3 at the show and immediately knew the owner nailed the fitment. They chose the OZ Racing Superturismo Lm in a 20x8.5 square setup. Running the same width at all four corners keeps the handling predictable and balanced.
The 53 offset sits right in the sweet spot for the 8V platform. It pushes the wheels out just enough to kill that factory tuck without needing aggressive fender work. You get a flush look that still respects the inner clearance requirements.
Clearing those massive front calipers is the biggest hurdle on the RS3. These OZ wheels provide ample spoke clearance, so you won't need sketchy spacers to clear the brakes. The hub bore matches up perfectly, which keeps everything vibration-free at high speeds.
The 20-inch diameter fills the wheel wells aggressively, especially since the owner installed a solid set of coilovers. You have to watch your fender liner clearance when you dial that height down. I checked for rub marks, and everything clears cleanly even under heavy cornering loads.
Looking at the barrel depth, the Superturismo Lm design carries a lot of visual weight. The multi-spoke pattern draws your eye outward, making the wheel look larger than it actually is. It creates a bold, race-bred aesthetic that fits the RS3 character perfectly.
Running this setup requires careful attention to alignment specs. A little negative camber goes a long way here to protect your tires. Once you get the dial-in right, the car grips the road like a slot car.
What We Recommend for Audi RS3 Base 2017 Owners
If you want to replicate this look, stick to the 19 or 20-inch range. Anything smaller looks lost, and anything larger ruins the ride quality on these uneven city streets. We prefer an 8.5-inch width for a clean, daily-driven stance.
Offsets between 45 and 53 are your golden ticket. Anything lower than 45 will push the wheel out too far and eat your fenders for breakfast. Stick to the higher side of that range to keep your paint intact.
Don't fall into the trap of running a staggered setup on this Quattro system. Keep your rolling diameter identical front to rear to protect your center differential. A square setup is safer, cheaper to maintain, and easier to rotate.
If you plan to lower the car, invest in quality coilovers rather than just springs. Adjustable damping lets you dial in the stiffness to handle the larger 20-inch wheels. Don't cheap out on the tires, either; get something with a stiff sidewall to handle the weight.
Watch your tire stretch carefully. A subtle stretch looks cool, but too much exposes your rim to curb rash every time you parallel park. Keep the sidewall vertical for the best protection and a meaty, purposeful look.
Style and Build Analysis
The Anthracite finish is a masterstroke against the factory paint. It adds a layer of depth that silver wheels just can't match. In direct sunlight, the metallic flake pops and highlights every intricate detail of the OZ design.
The Superturismo Lm is a legend for a reason. It screams rally heritage and motorsport influence without trying too hard. It’s an iconic look that ages better than almost any other wheel on the market today.
Proportions are everything on the RS3. Because the car has such wide front fenders, these wheels fill the gaps without looking like a cartoon. It commands respect without being gaudy or over the top.
I have seen dozens of RS3 builds, but this one stands out. Most people bolt on generic wheels that wash out the car's presence. This owner chose a design that complements the sharp body lines of the Audi.
It creates a cohesive package that looks like a factory special edition. You could park this next to a high-end supercar, and it would hold its own. The stance is aggressive, purposeful, and absolutely dialled in.
Why We Love This Build
This car stops us in our tracks because it balances aggression with pure class. When the light hits those Anthracite spokes, the whole silhouette of the RS3 comes alive and pulls your gaze directly to the ground. It feels like a machine that was purpose-built for the autobahn.
We love that the owner kept it clean rather than chasing trends. This build proves that if you choose the right offset and a timeless wheel design, you never need to overcomplicate things. It looks exactly how an RS3 should have left the factory floor.
Stop dreaming about your dream build and start sourcing the parts. This setup is the ultimate blueprint for any RS3 owner who wants to level up their game. Go get that fitment dialed in right now.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Audi RS3 Base 2017
- Vehicle Color:
- Wheel Brand & Model: OZ Racing Superturismo Lm
- Wheel Size: 20×8.5 / 20×8.5
- Offset: 53 / 53
- Wheel Finish: Anthracite
- Tires: Hankook Ventus S1 Evo 3 225/30 25.3″x8.9″ / 225/30 25.3″x8.9″
- Suspension: Coilovers
Before You Buy: Fitment Checklist
We talk to Audi RS3 Base owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×8.5 / 20×8.5-inch wheels fit my Audi RS3 Base? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Audi RS3 Base owners run 20×8.5 / 20×8.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
