About This Acura TL SH-AWD 2014 Build
We love featuring real builds from real owners. This Acura TL SH-AWD 2014 sits on a set of 20×10.5 / 20×10.5-inch Infinitewerks SS3 wheels, and the result speaks for itself.
The owner chose Infinitewerks for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Acura TL SH-AWD builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Infinitewerks SS3 creates a look that balances aggression with elegance.
Fitment Breakdown: Infinitewerks SS3 on the Acura TL SH-AWD 2014
When I first walked around this 2014 Acura TL SH-AWD, the stance hit me instantly. We are looking at a square setup of Infinitewerks SS3s measuring 20x10.5 all around. Running that much width at all four corners requires serious commitment to fender work.
The offset sits at a flat 11 front and rear. That aggressive number pushes the wheels right to the edge of the fenders. It creates a meaty, flush look that most TL owners only dream of achieving.
Clearing the SH-AWD calipers was the biggest hurdle for this build. The SS3 spoke design offers enough concave profile to clear those massive brakes without needing massive spacers. We love how the wheels sit perfectly over the hub without looking forced.
The air suspension setup is the secret sauce here. When the car airs out, the fenders tuck neatly between the tire and the polished step lips. It is a precise dance between metal and rubber that only works because of this specific offset.
You need to watch out for the inner fender liner at full lock. With 10.5 inches of width, you will definitely kiss the plastic if you are not careful. We always suggest a heat gun to reshape those liners if you go this wide.
The barrel lip depth is massive for a sedan platform. It gives the SS3 that old-school multi-piece aesthetic that looks right at home on the TL’s body lines. Every detail here shows exactly what happens when you measure twice and cut once.
What We Recommend for Acura TL SH-AWD 2014 Owners
If you want to replicate this look, start with your goals. A 10.5-inch width is at the outer limit for this chassis. If you want to daily drive without major headaches, we suggest sticking closer to a 9.5-inch width.
Offsets are where most builders fail on the SH-AWD platform. We have found that an offset between 25 and 30 is the sweet spot for a functional flush fit. Going down to 11 like this build requires fender rolling and a bit of stretch.
Never ignore your hub bore when ordering custom wheels. The TL needs a 64.1mm bore, so make sure your Infinitewerks are machined correctly. Hub-centric rings are okay, but direct fitment is always the professional choice.
Regarding tires, this build runs a slight stretch to clear the fenders. We recommend a high-quality performance tire with a rounded sidewall to save your paint. Do not cheap out on rubber if you plan to run an aggressive offset.
Avoid the temptation to use thick bolt-on spacers to push your wheels out. They increase your scrub radius and put unnecessary stress on your wheel bearings. Always build your offset into the wheel itself for the best handling results.
Style and Build Analysis
The finish on these SS3s is nothing short of art. The brushed faces catch the light in a way that standard silver paint just cannot touch. It provides a premium, industrial vibe that elevates the entire aesthetic of the TL.
Those polished step lips act as a perfect border for the wheel design. They create a distinct separation between the tire and the center face. It makes the 20-inch diameter feel purposeful rather than oversized.
The 24k gold hardware is a bold choice that actually works here. It highlights the assembly bolts and adds a layer of luxury to the build. We rarely see gold hardware used with such restraint and class.
Those candy red center caps act as a bright focal point against the brushed metal. They tie in perfectly with the Acura badging and give the wheels a custom, bespoke feel. It is a small detail that makes the biggest impact.
When the car airs out, the proportions feel spot on. The wheels fill the arches completely, leaving just enough room to show off the craftsmanship of the lips. This is exactly how a modified executive sedan should look.
Why We Love This Build
This TL is a masterclass in balance and aggression. Seeing the brushed finish shimmer under the sun while the gold hardware pops against the deep step lips is a car guy’s dream. It turns a capable AWD sedan into a true show-stopper.
Every time the owner airs this car down, the wheels sit flush against the fenders with absolute surgical precision. It does not look like a compromise; it looks like a factory-optional upgrade from a parallel universe. We love seeing such bold specs pulled off with this level of confidence.
You need to see this build in person to really appreciate the harmony of the design. It is aggressive, refined, and entirely unique. Go big or go home.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: Acura TL SH-AWD 2014
- Vehicle Color:
- Wheel Brand & Model: Infinitewerks SS3
- Wheel Size: 20×10.5 / 20×10.5
- Offset: 11 / 11
- Wheel Finish: Brushed faces, polished step lips, 24k hardware and candy red center caps
- Tires: Achilles ATR Sport 225/35 26.2″x8.9″ / 225/35 26.2″x8.9″
- Suspension: Air Suspension
Before You Buy: Fitment Checklist
We talk to Acura TL SH-AWD owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×10.5 / 20×10.5-inch wheels fit my Acura TL SH-AWD? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of Acura TL SH-AWD owners run 20×10.5 / 20×10.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
