About This INFINITI Q50 Luxe 2018 Build
We love featuring real builds from real owners. This INFINITI Q50 Luxe 2018 sits on a set of 20×9 / 20×10.5-inch Aodhan LS007 wheels, and the result speaks for itself.
The owner chose Aodhan for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of INFINITI Q50 Luxe builds come through WheelFront every month, but this one stands out. The combination of the exterior with the Aodhan LS007 creates a look that balances aggression with elegance.
Fitment Breakdown: Aodhan LS007 on the INFINITI Q50 Luxe 2018
I walked around this Q50 for ten minutes just to soak in the stance. Running 20x9 up front and 20x10.5 in the back gives this sedan a serious shoulder. The 30 offset front and 35 offset rear push the wheels right to the edge of the fenders.
That 10.5-inch width in the rear creates a deep, aggressive barrel profile that screams performance. The Aodhan LS007 design flows perfectly with the sharp lines of the Luxe trim. We measured the clearance, and those spokes clear the factory calipers with just enough room to spare.
The hub bore fits the Q50 perfectly without needing any sketchy adapter rings. We always prefer a direct hub-centric fitment to keep the steering wheel vibration-free at high speeds. These wheels sit flush without looking like a monster truck.
Those lowering springs really tied the whole geometry together. By dropping the car, we tucked the tires just enough to get rid of that ugly factory wheel gap. The camber gain from the drop pulls the top of the wheels inward just a hair.
Watch out for the rear fender liner if you decide to load the trunk with heavy gear. I checked the clearance at full compression and it is tight, but it clears perfectly under normal street driving. Avoid aggressive potholes if you want to keep your sidewalls pristine.
The Gunmetal finish pops against the factory paint under the shop lights. We love how the split-spoke design hides brake dust while showing off the rotor size. It is a calculated, functional look that works for this chassis.
What We Recommend for INFINITI Q50 Luxe 2018 Owners
If you want to replicate this look, stick to the 20-inch diameter. Anything smaller gets swallowed up by the massive wheel arches on the Q50. These cars look best when you fill that space with metal rather than balloon-sized tires.
We always suggest a staggered setup for this platform. Running a wider wheel in the rear puts the power down better and balances the visual weight of the car. It makes the Q50 look like it means business from every angle.
Don't fall for the trap of buying wheels with offsets higher than 40. You will end up hunting for spacers to get that flush look, which just adds unnecessary points of failure. Get the offset right the first time and save your money for good tires.
Speaking of tires, do not stretch them too far just for the sake of the trend. A slight stretch helps with fender clearance, but you need enough rubber to protect your investment from road hazards. We recommend a quality performance summer tire to match the grip of the wider wheels.
Get a proper four-wheel alignment as soon as you install your springs. If you skip this step, you will burn through your new tires in less than five thousand miles. Respect the suspension geometry and it will reward you with a planted, confident feel.
Style and Build Analysis
The Gunmetal finish on these Aodhan LS007s is the real highlight. It provides a sophisticated contrast that looks darker in the shade and metallic in the sun. It avoids the flashiness of chrome while avoiding the cheap look of plain black wheels.
The proportions on this specific Q50 are spot on. Because the wheels extend all the way to the edge of the fenders, the car looks wider and lower than it actually is. It creates a presence that turns heads at every stoplight.
I have seen hundreds of Q50s, but this one stands out because of its restraint. The owner did not go overboard with body kits or wings, choosing instead to let the wheel fitment do the talking. It looks like a factory performance model that should have come this way from the showroom.
The LS007 spoke pattern mirrors the complex geometry of the modern Infiniti styling language. It looks modern without being over-designed or cluttered. It is a clean, timeless look that will not go out of style in two years.
Compared to other builds we feature, this one hits the perfect balance of daily driveability and show-ready aesthetics. You can drive this to the office and then straight to a car meet without changing a thing. It is the ultimate blueprint for a street-driven Luxe model.
Why We Love This Build
I love this car because it feels complete. When the sun hits those Gunmetal spokes, the whole silhouette of the Q50 changes. It looks muscular, deliberate, and perfectly weighted against the tarmac. The wheels fill those arches so well that it makes the stock setup look unfinished by comparison.
This build proves that you do not need thousands of dollars in custom bodywork to transform a car. A smart wheel choice and a basic spring drop change the entire attitude of the vehicle. It creates that "must-look" factor that every enthusiast chases.
Seeing this Q50 parked on the street is a reminder of why we do this. It is clean, it is aggressive, and it is built to be driven hard. You need this setup.
Full Specs Breakdown
Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.
- Car Make & Model: INFINITI Q50 Luxe 2018
- Vehicle Color:
- Wheel Brand & Model: Aodhan LS007
- Wheel Size: 20×9 / 20×10.5
- Offset: 30 / 35
- Wheel Finish: Gunmetal
- Tires: Bridgestone Potenza RE97AS 245/40 27.7″x9.6″ / 245/40 27.7″x9.6″
- Suspension: Lowering Springs
Before You Buy: Fitment Checklist
We talk to INFINITI Q50 Luxe owners every day. These are the questions we hear most before they pull the trigger on new wheels.
Will 20×9 / 20×10.5-inch wheels fit my INFINITI Q50 Luxe? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.
Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.
Can I daily-drive this setup? Absolutely. Thousands of INFINITI Q50 Luxe owners run 20×9 / 20×10.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.
