Honda Civic Si 2019 with 19×8.5 / 19×8.5-inch AVID1 AV20 Wheel

About This Honda Civic Si 2019 Build

We love featuring real builds from real owners. This Honda Civic Si 2019 sits on a set of 19×8.5 / 19×8.5-inch AVID1 AV20 wheels, and the result speaks for itself.

The owner chose AVID1 for a reason. This brand delivers serious quality and a design language that turns heads at every car meet. We see hundreds of Honda Civic Si builds come through WheelFront every month, but this one stands out. The combination of the exterior with the AVID1 AV20 creates a look that balances aggression with elegance.

Fitment Breakdown: AVID1 AV20 on the Honda Civic Si 2019

I walked around this Si for twenty minutes just to soak in the stance. Running 19x8.5s with a +35 offset fills the 10th Gen arches perfectly. The wheel sits flush with the fender line without looking like a monster truck.

That +35 offset is the golden ticket for this chassis. It pushes the wheels out just enough to kill that sunken stock look. You get a much wider track width without needing a sledgehammer for your fenders.

Clearance is a non-issue with this specific spoke design. The AVID1 AV20 spokes curve outward enough to keep your factory Si calipers safe. You won’t need to hunt for spacers just to get the wheels spinning.

We checked the hub bore closely during our inspection. Since these wheels utilize the correct hub-centric rings, you avoid those annoying steering wheel vibrations at highway speeds. It drives as smooth as it looks.

The barrel depth on these 19s gives the car a serious racing profile. You get that extra bit of visual aggression that smaller 17 or 18-inch wheels just cannot replicate. It commands attention from across the parking lot.

Because the owner dialed in the coilovers, the wheel well gap is virtually non-existent. Just watch your speed bumps and steep driveways with this setup. A heavy hit could kiss the fender liners if you run too much tire meat.

We always warn guys to check their alignment specs after dropping the car. With this aggressive offset, you need a healthy amount of negative camber to tuck the tires properly. Do it right or you will be buying new fenders in a month.

What We Recommend for Honda Civic Si 2019 Owners

Don't just buy wheels because you like the look on Instagram. We always tell owners to prioritize the offset so the tire doesn't shred the plastic liner. A +35 to +40 offset is the sweet spot for a clean, flush look on the 10th Gen.

Stick to a square setup if you actually drive your car hard. Running the same 19x8.5 size on all four corners keeps the handling predictable in the corners. Staggered setups on a front-wheel-drive platform like this just ruin the balance.

Tire choice makes or breaks this fitment. If you stretch the tire too thin, it looks cheap and exposes the rim to every pothole in the city. Go for a tire width that protects the rim lip while keeping the sidewall stiff.

Skip the cheap spacers if you want to keep your wheel bearings happy. If you choose the right offset from the start, you never need to rely on those sketchy adapters. Do it once, do it right, and save your cash for better coilovers.

Avoid the temptation to go wider than 9 inches unless you plan on doing serious bodywork. Anything wider than that on a 10th Gen Civic usually ends in a rubbing nightmare. Keep it simple and keep it functional.

Style and Build Analysis

The bronze finish on these AVID1s is an absolute masterstroke against this paint color. It pops in the direct sun but looks subtle and serious when the clouds roll in. It provides that perfect contrast that makes the wheels the star of the show.

The AV20 design mirrors the aggressive lines of the Civic Si perfectly. Those sharp, multi-spoke patterns give the car a high-end, aftermarket aesthetic that feels intentional. It looks like it belongs on a rally stage or a track day event.

Proportions are everything when you pull up to a meet. The 19-inch diameter fills the wheel well exactly how Honda should have done it from the factory. It gives the Si a grown-up, planted appearance that demands respect.

We have seen plenty of Civics, but this one captures the spirit of the build better than most. The stance is aggressive without being tacky or over-the-top. It finds that elusive balance between a daily driver and a show-stopper.

When you see this car rolling, the wheels catch the light in a way that highlights every curve of the body. The bronze finish isn't too flashy, yet it pulls the eyes downward instantly. It is a textbook example of how a few choice mods change the entire vibe.

Why We Love This Build

I cannot stop staring at the way those bronze spokes pop under the wheel arches. The drop from the coilovers closes the gap so tightly that the car looks like it is glued to the asphalt. It is the perfect blend of street style and track-ready aggression that defines the modern Si scene.

The 19-inch AVID1 AV20s transform this Honda from a standard commuter into a total head-turner. Every time the sun hits that bronze finish, the car just glows with a premium, custom personality. It is the kind of build that makes you look back every single time you walk away.

You need to see this build in person to really appreciate the stance. This Civic is truly the benchmark for how a 10th Gen should sit. Go get yourself a set.

Full Specs Breakdown

Here is exactly what this owner is running. We break down every detail so you can replicate this build or use it as a starting point for your own setup.

  • Car Make & Model: Honda Civic Si 2019
  • Vehicle Color:
  • Wheel Brand & Model: AVID1 AV20
  • Wheel Size: 19×8.5 / 19×8.5
  • Offset: 35 / 35
  • Wheel Finish: Bronze
  • Tires: Falken Azenis RT660 255/40 27″x10″ / 255/40 27″x10″
  • Suspension: Coilovers

Before You Buy: Fitment Checklist

Wheel sizes explained - diameter, width, offset and backspacing guide
Understanding wheel sizing: diameter, width, offset and backspacing all affect fitment on your Honda Civic Si.

We talk to Honda Civic Si owners every day. These are the questions we hear most before they pull the trigger on new wheels.

Will 19×8.5 / 19×8.5-inch wheels fit my Honda Civic Si? Yes, but fitment depends on width, offset, and tire size working together. A wrong offset means rubbing. A wrong tire size means poor handling. Always verify all three.

Do I need to modify my fenders? That depends on your offset and suspension. A conservative offset with stock ride height usually fits without modification. Go aggressive and you may need to roll or pull your fenders.

Can I daily-drive this setup? Absolutely. Thousands of Honda Civic Si owners run 19×8.5 / 19×8.5-inch wheels every day. The key is choosing the right tire with enough sidewall to absorb road imperfections.

Honda Civic Si2019 with 19×8.5 / 19×8.5-inch AVID1 AV20 Wheel Gallery

Related Galleries & Links

Filter